Owner's manual for craftsman YT4000 model 917.288561

seer.com

go to sears site and use make and model number for manual search

David, you may need to go to Sears for the manual? I found ZERO hits in all the places I checked...

THIS is not quite a Manual, but perhaps the photos may help?
craftsman gas edger 147354042 owner manual Google Search

Anthony

On most Craftsman parts, there is a number like....
315.22831 Whereas I can't be certain....I have provided a link that may be your manual.

Craftsman TABLE SAW 315 22831 Owner Manual

Semper Fi,
Z

Here's a link to a manual for your craftsman rear tine tiller CRAFTSMAN 917 296020 Owner Manual

I am wondering if you have the right belt for that machine. or possible its not installed properly.The belt should be tight when engaged. The tightener may not be working as well. These are things to check. Does the belt try to tighten up when you engage it?
I am wondering if the wrong belt was the reason why some one lowered the deck too low.

what diagram ???

Deck Height switch isn't engaged or pushed in when you remove the deck and it will not start. No current can flow until this switch is pushed in.

do you have bagging blades in place? reg blades will not lift enogh

10w-30