Need trigger Dewalt jigsaw dw 317-xe - Dewalt Drills

Hello, Frank -

Do you mean a Dewalt DWE305 model reciprocating saw? I do not find any model 305 DW for a Dewalt saw of any kind.

You can find the switch replacement to order here:
https://servicenet.dewalt.com/Products/Detail?isId=true&productNumber=DWE305&selectedType=26680

It is item #7.

Best wishes.

Most Dewalt manuals are available here: https://servicenet.dewalt.com/Home . There are 40 Dewalt power tools with 321 in the model number. Several are jigsaws. There are two types for the DW321 (TO3PAK-2LE JIG SAW) jigsaw. Please look at the label on the jigsaw to ensure that you get the correct model and type. The direct link to the manual for the DW321 Type 1 is currently https://servicenet.dewalt.com/Products/GetDocument?docName=402086-01,DW321.pdf&productId=2841&productType=3001&documentId=24909&translatedFileName=http://documents.dewalt.com/documents/English/Instruction%20Manual/402086-01,DW321.pdf .

To change the regular blade on the DW321 type 1, unplug the power tool. To remove the blade, pull the knob on the top of the jigsaw up about 1/4". Rotate the knob counterclockwise until the clamp opens. Do not force the knob after it stops. Insert the blade making sure that the back edge of the blade fits into the support roller. Rotate the knob clockwise until it clicks and then push it down.

I hope this helps.

Cindy Wells

Toolpartsdirect.com

DeWalt DW331 Instruction Manual Page 2

This should help.

Here is a link to the product where you can download a manual:
DEWALT com

Please check out the instructions on ehow.com this should help you.

http://www.ehow.com/how_4912250_change-dewalt-jigsaw-blade.html

That sounds right. It is probably the type that uses adhesive backed paper. You stick the paper to the rubber pad.

switch or switch connection, fried plug.

I have fix my dewalt dw 056 with a switch comming from an old dewalt hammer drill that i had lying around if you find and older dewalt hamme drill with burn brushes u can interchange the switch ,they sell the repalcement new switch for around $56.00 here in canada its not worthed u can get a new refurbish dewalt impact for around $99.00 from toolking

The Switching should go like this

(single letters denote wire color)

Y---o o---R

B---o o---B

The contacts where the black wires attach are the points on the switch that break when continuity is checked.