What is Error code PF?

Let's guess it is a Maytag Dryer :>/
'Make model (what it is) in all questions please.

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
Dec 14, 2019

PF - Error Code - Dryer - Product Help - Maytag

Search Results

whirpool f21 error code - YouTube

? 3:04
https://www.youtube.com/watch?v=b24PVv-ORqg
Jul 1, 2012 - Uploaded by davidmontabon
whirpool f21 error code. ... Maytag , Whirlpool Washer Repair - Drain pump error, no drain - F9E1- MHWE201YW00 - Duration: 4:29.

My maytag 5000 series steam washer stopped and said Sud ...

www.fixya.com/support/t8682656-maytag_5000_series_steam
Mar 17, 2011 - my maytag 5000 series steam washer stopped and said Sud and now says ... Clicking this will make more experts see the question and we will .... I bought aMaytag 3000 seris in 2008 and I am getting these messages: F21 ... Maytag 5000 Series washer F21 error code was flashing and door will not open.

Whirlpool/Kenmore/Maytag & more-F02/F21 & Sd error codes

fixedappliance.blogspot.com/.../whirlpoolkenmoremaytag-more-f02f21-...

Must be something wrong with the cord itself PF means power failure:

Codes and manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Error Code F3 E2 is a temp system error. This error is displayed if the water temperature sensor value is out of range (23°F to 217°F [-5°C to 103°C]). Correct ohm reading should be 500-100K ?.

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Power Failure maytag whirlpool same same:

http://www.advantagesupplyfl.com/WhirlpoolDryerFaultCodes.html

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

;ll;

PF means Power Failure!
Unplug both units for 10 minutes, then plug them back in and try operating them. You may need an electrician to investigate why you are losing power to both units

THIS is a "Power Failure " Clease the code (press Cancel button) and see if it starts up