Question about Everex Computers & Internet

1 Answer

Unit does not display anything on screen but lights turn on when powered up

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

When you say lights, do you mean the lcd backlight? or the standard power lights.

If the lcd backlights come on with no image on the screen then you have either a bad connection from the lcd to your mobo, or just a bad lcd. not too hard to replace.

if the lcd backlights do not come on but the power lights do, and you can hear everything else clicking away. you have 2 things to check. First try booting up with a external monitor. and see if you get video. 2nd one you turn it on [without an external monitor] in a very bright room look at the screen very closely you may be able to see the image just very faintly. if that is the case then you have either a bad inverter or 1 - 4 bad light tubes depending on how maney are in there. but my bet would be on the inverter. again easy to replce and usually on 40 - 60$. Good luck

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I power up the unit, the camera is displayed immediately, the backup wire turns the screen off.


There's a wire in the head unit harness that's meant to be connected to the vehicle's reverse light wire. If you don't have a rear view camera, this wire should not be connected to anything.

Aug 06, 2015 | Pyle PLCD23A CD Player

2 Answers

I have dell d630 it turn on but not display anything what is the problem


If the unit powers up and it seems to work except for the screen, hook a external monitor to the video output usually on the back, if picture is present! the laptop has issues. But if both screens show the same symptom the problem is in the video graphics card.

Apr 08, 2012 | Dell Latitude D630 Intel Core 2 Duo T7250...

1 Answer

Black screen


Don't let the computer turn the monitor off. Go into control panel and click on power option. don't let the computer turn anything off and disable hibernation if on. go to screen saver and have it come on in about 30 mins.

May 27, 2009 | ViewSonic VX2235wm LCD Monitor

1 Answer

Monitor : no display and blue led light is blinking


The power supply is the first thing that the 110v electric line goes into. The invertor is the next item past the power supply, or sometimes contained within it. I do not thing monitors are a DIY repair.      First substitute a different monitor to confirm that it is, in deed , the monitor and not the video card.

Jan 14, 2009 | Advueu Technology ADV178T 17" Flat Panel...

1 Answer

My Garmin C3550 street pilot will power up but screen is only white.


Try recalibrating the touch screen. Turn on unit while continuing to press the power button for about a minute. You will then be prompt to touch a series of dots on the screen. Once prompt to do so, release the power button and touch the dots. Press OK when calibration is complete. The unit will continue to power on. Good Luck.

Aug 11, 2008 | Garmin StreetPilot c550 GPS Receiver

1 Answer

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? Monitor will go on for a split second, then screen will go...


they normally turn off like this when they aren't receiving a video signal from the pc (same as when you turn off the pc). make sure that it is connected properly, and that the video output is activated. try disconnecting from the other monitor while its on and connect the problem monitor...if it still isn't working then there may be a problem with the cable or the monitor itself. Try another VGA or DVI cable. Hope this helps

Mar 29, 2008 | Computers & Internet

1 Answer

No power..


See posting regarding hiccupping PSU & faulty diode.

Dec 20, 2007 | Samsung DVD-VR320 DVD Recorder/VCR

1 Answer

Screen light doesn't turn off


Check your display settings. Settings, Phone, Display: Check that Light Timeout is set (I have mine setup for 20 seconds). This should do the trick. If you wish to conserve yet more battery power, set "sleep mode" to on and set a power saver timeout (mine is set to 1 minute). good luck.

Jun 05, 2007 | Nokia E61 Smartphone

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Everex Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

k24674

Level 3 Expert

7993 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an Everex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...