Question about D-Link DSL 300G+ (DSL-300G+) Modem

Open Question

I'm using a intermec CK60 handheld with the snapon

I'm using a intermec CK60 handheld(Just got it a week or so ago) with the snapon modem and i have to dissconnect my D-Link DSL-300g modem from the internet( remove the phone jack from the wall and replace it with the Intermec phone jack) in order for the handheld to transmit. If I don't the CK60 just hangs and times out.I have tried connecting with and without the internet filter but it still hangs and times out. Also tried differant jacks in the house, but nothing. I went to the neighbours house and tried (they have cable internet) and it transmitted without any problem.
I don't know if its a bug in the handheld,ISP or either modem. I phoned my company who are just as amazed as I am to why this is a problem to what it seems by them to only be me with this problem. I haven't phoned my ISP (Telus) with this problem yet till I try to cover all the bases before I have to pay to have someone make a housecall.
I've been searching the internet for a forum or anything to do with the intermec CK60 but I end up finding retailers and manuals that haven't helped me at all
Thank You

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 6487 Answers

SOURCE: Modem keeps disconnecting and needs rebooting every time I use it

Yes, this can be a problem with the modem that you have first thing that you need to do here is to reset the modem and reconfigure it back, but if after that still have the same problem better contact your ISP and ask them if everything is working from their end...

Hope that helps...............

Posted on Oct 12, 2008

Rider On Way
  • 1679 Answers

SOURCE: Actually involves a D-Link DSL 300G Modem. Loses


This is common issue with the D-Link modems. There is a firmware update released by D-link.
Download the firmware update and install. It should fix the issue.

Download Firmware

Let us know if it fixed the problem

* Please rate this solution and comment on it

Posted on Nov 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to disassemble CN50 to retrieve SIM card

Page 60 has the answer, it may be very stiff, gently tug it with some small pliers.

Mar 06, 2013 | Intermec CN50 Handheld Mobile Computer...

1 Answer

CK71 stuck on Launching OS


Please try to Install OS through Intermec Smart System from - downloads

and try to install OS via WIFI connection

Note : Make sure about WIFI Connection & Battery Charging power of device


Aug 22, 2011 | Intermec CK71 Handheld Mobile Computer...

1 Answer

Hi, my intermec ck3 has intermettent signal problem hope that you can give me some tips to solve this. Many thanks..

it could be a couple of things such as the environment it is being used....porr signal is usally caused by the WIFI network it is connecting to or the environment.

May 13, 2011 | Intermec CK3 Handheld Mobile Computer -...

1 Answer

Intermec CK30 Error Opening Wedge Problem

I was getting the same error and resolved it by removing the battery and pressing the reset button. When you turn the scanner back on all the data will still be intact.

Apr 24, 2009 | Intermec CK30 Handheld Computer

1 Answer

Keep getting error Cannot execute btcc.exe

If your device is registered at you should be able to dowload a firmware flash for the device. Follow the instructions and reflash the device. If this does not work the bluetooth radio could have malfunctioned.

Feb 11, 2009 | Intermec Computers & Internet

1 Answer

1551B Cables


you can configure the scanner to match your laptop as long as the cable connects properly

you should be able to print out barcodes to scan to configure

go to

or technical support

or cal scansource tec support and they can tell you over the phone

best of luck if youhave any questions just respond

Jan 06, 2009 | Intermec 1551B (1551b0700) Handheld

2 Answers

Connect MC9090-G to an Intermec 2100 Access Point

Make sure that the ESS ID and security features match the ones on the AP.

Also, from the MC9090, you will need to click on the radio icon, select options and in the top drop down menu, choose regulatory. select the country where you are and uncheck the box named enable 802.11d.

This should have the terminal connected on to the network.

Jul 11, 2008 | Symbol MC9090 Barcode Scanner

1 Answer

Intermec CK31 handheld - Configure to read bracket symbol

Here at Legacy Global we can help you. Call Diana at 1-847-750-9231.

Mar 10, 2008 | Intermec CK31 Portable Terminal

Not finding what you are looking for?
D-Link DSL 300G+ (DSL-300G+) Modem Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides