Question about Canon PIXMA MP160 All-In-One InkJet Printer

1 Answer

My ink absorber is full on my canon mp160 printer how to change it and where is it

Posted by on

  • watsonhvac Jul 16, 2009

    that didn't work the Alarm in flashing green the E 2 7 are flashing

  • watsonhvac Jul 20, 2009

    thank you very much judy watson

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Hi,

How to clear E27 Waste ink absorber full Error:

1.With the printer powered off but connected to a power source,press the Power button while pressing and holding the Stop/ Reset button.

2.When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.

3.When releasing the Power button and the Stop / Reset button (regardless of order),the printer will move into a service mode. (Waiting for menu selection)

4.When the on/off lights in green, press the Stop/Reset button thespecified number of time(s) according to the function listed in the table below.

(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)

Note: press 4 times for waste ink counter reset.


The number of the Reset button pressing LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)
5.Turn off the printer.( it must be turn off) then turn it on again.

ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Posted on Jul 16, 2009

  • Vinod Kumar
    Vinod Kumar Jul 16, 2009

    Did you entered the service mode..Or u faced problem entering the service mode

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon MP160 Printer "Ink Absorber is Full


Canon MP160 PIXMA shows ink cartridge full. How do I empty...as I just refilled with new cartridge, due to stating no ink. Please help..thank you.

Mar 12, 2013 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

My canon MP160 error 27. I've tried the trick in service mode.. But still can't reset it.. please help me..


E27 is the WASTE INK ABSORBER FULL error message. Try send it to service centre to do the WASTE INK ABSORBER replacementjob & waste ink counter reset job.

May 19, 2010 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

E 8 solving


E8 = Waste ink absorber full, or platen waste ink absorber full

52b337a.jpg

Aug 05, 2009 | Canon PIXMA MP160 All-In-One InkJet...

3 Answers

Waste ink couter


You need to locate the L shaped plastic under the ink cartidge and then clean with water ...

Jul 18, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Canon pixma mp160 ink absorber is full


e75ff09.jpg this the reset wast ink please follow it step by step

Jul 15, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Ink Absorber Full


The first is to disassemble the printer to gain access to the waste ink resevoir and replace or wash out, rinse and dry the old felt pads. The second part, after everything is reassembled is to reset the internal counter that determines when the ink absorber is "full". This is usually done by pressing a combination and sequence of buttons on the panel. One of the best sites is FixYourOwnPrinter.com for information on a large variety of printers including reset sequences.

May 21, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

E27 Waste ink absorber full or platen waste ink absorber full


canon mm140 E27 = Waste ink absorber full or platen waste ink absorber full what would be made to solve this problem

Dec 06, 2008 | Canon PIXMA MP160 All-In-One InkJet...

4 Answers

Canon printer mp160 e27


how can i get my ink absorber to be unful and work agian so i can print again WANALI

Aug 26, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Waste tank absorber is almost full ~ message


I've taken this from my manual.
This error message indicates that the ink absorber is nearly full.
The machine has a built-in ink absorber to hold the ink used
during FINE Cartridge cleaning, for example.
You can continue printing by selecting Continue*1
on the display on your camera.
However, because printing is disabled once
the ink absorber becomes completely full
and until the ink absorber is replaced, you
are recommended to contact a Canon
service representative as early as possible.
*1 To resume printing, you can press
[OK] (MP180) / [Black] or [Color] (MP160) on
the machine instead of selecting [Continue].

Feb 13, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...