Question about GE GSS25JFM Side by Side Refrigerator
You could need a shot of freon in this unit. If the freezer is not freezing up. If the freezer is freezing up, one of your defrost parts may be out. I would start with the defrost heater, then check out the timer and t-stat afterwards. Call us for parts! Hope this solves your problem.
Posted on Sep 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Depending on age of unit. Sounds like a fan motor or defrost heaters witch can cost up to 300 to 400 to fix depending on the heaters or motor. Ask for free estimate before you commit to fix. Rus
Posted on Jun 27, 2009
If the evaporator coils behind the back panel of the freezer
are icing up because of auto defrost failure that will stop the circulation of
cold air and eventually affect the freezer too.
check defrost timer, defrost heater, defrost thermostat.
The fridge gets its cold air from the freezer through a vent between the freezer and fridge.The fan in the freezer blows air through it. There is a flap you adjust with the fridge temp. control. Make sure it's opening and closing when you adjust the fridge temp ..
Posted on Jul 01, 2009
I'm sorry we must have got disconnected somehow, like I said the problem is going to be with the defrost system or the evaporator motor from the limited information you gave me...hope your problem was resolved. Thanks! Mike
Posted on Jul 15, 2009
Is it very hot out side the unit.recharging may not hurt is it cleaned the lint could be trapping the radiator were the coolan goes through to cool down try cleanning underneath before recharging
Posted on Jul 26, 2010
SOURCE: Danby kegerator at 50 degrees.
How To Test the Compressor Relay Beneath the terminal cover is found the compressor relay (labeled "A" below), overload protector (labeled "B") and the electrical terminals of the compressor motor. Remove the compressor relay by pulling it straight off from the compressor.Pull the wire off of the side terminal of the relay. It is connected with a slip on connector. Firmly pull the connector, do not pull on the wire. You may need to use a pair of needle-nose pliers. Inspect the connector and terminal for corrosion. If either is corroded they should be cleaned or replaced. There are two types of relays you may encounter, wire coil and solid state. If the relay has an exposed wound wire coil it can be tested for continuity. Otherwise, the relay is of solid state design and requires specialized equipment for testing.
Posted on Jul 14, 2011
Tips for a great answer:
Jun 09, 2017 | Samsung Refrigerators
May 08, 2017 | Heating & Cooling
Jul 02, 2012 | Goodman CKL36AR36 Air Conditioner
Feb 16, 2012 | Magic Chef Refrigerators
Aug 08, 2011 | Refrigerators
Aug 01, 2011 | Kenmore Refrigerators
Jun 19, 2011 | Friedrich ZStar ZQ10A Air Conditioner
Jun 17, 2011 | GE Profile 25.6 Cu. Ft. Side-by-Side...
Oct 15, 2010 | Haier HSB03 Compact Refrigerator
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: