Clicking noise when plugged in. wont power on

Your battery is no good and needs to be replaced.

Hello
Check the power supply regulator board for the fault.

Bad capacitors in the power supply. 2200 and 1000uf. They're marked at 16v, put in 25v.

this could be the power supply board

problem of the lens unit not getting opend well,so get it serviced/replace it

I would check wherever possible for foreign objects in the printer. Failing that, a partial reset is available for your PSC 2410:

A partial reset can be done by:

1) Unplugging the power cord (you are already there!)
2) Press and hold the (#) key and (3) key while plugging the unit back in

THERE SHOULD BE A PLUG IN THE COVER FOR THE SUNROOF MOTOR THAT YOU CAN POP OUT & CLOSE MANUALLY WITH A SCREWDRIVER

Replace any swolen capacitors in power board.

The clicking noise is solonid which should be energising the starter and it isn't.

tv wont turn on when i hit power it makes the clicking noise like it is going to turn on, but never does and the red timer light next to the power button just flashes.
help!
trinitron kv29f1u
only clicks and blinks