Question about Vacuums

1 Answer

We have a Bissell Revolution Lift-Off Turbo 3760-1 and the upright brush is not working/rolling. It only moves when pushing the vacuum. We checked the belt and it seems to be fine. The vacuum works fine as a hand-held. Any suggestions? Thanks!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

These belts need to be changed every 6 months regardless of the way they look.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bissel 3760-4 brush motor doesn't turn on


Hi Tim. I understand the brush is turning & belt is fine. You may want to remove and reseat the canister. If this doesn't work, you'll want to have one of our Authorized Service Centers inspect your vacuum.
Here's a link to assist you in locating one in your area: http://www.bissell.com/service-centers/?cid=ccsocial

Apr 19, 2013 | Bissell Lift-Off(R) Revolution(R) Turbo...

1 Answer

Need a new belt for a bissell lift off revolution turbo


Hi Dale, sorry to hear the belt has broken. Now is a good time to order filters for orders that are $30 or more receive free shipping. Here's a quick link to ordering one.

http://www.bissell.com/parts/?sc=search2&searchtext=3760

Jan 26, 2013 | Bissell Cleanview Helix Deluxe Bagless...

1 Answer

I've changed the belt on my Bissell 3760-2 model but the brush still doesn't rotate. I've checked for clogs and there are none.


Clogs affect the air movement, but not the brush assembly. Remove the brush assembly from the vacuum base. Remove, clean, and lightly oil (with 3-1 or similar) the two end bearings. They are usually choked with debris to the point that they lock the brush roller. Reassemble it without the belt for a moment and check for free turning. If ok, install the belt and test the whole vacuum. Hope this helps!

Jan 29, 2011 | Bissell Lift-Off(R) Revolution(R) Turbo...

1 Answer

I have a 3760 lift off bissell. Replace the torn


Did you get the right belt size? The belt you should have bought is this one:

Bissell 3760 Belt

Nov 08, 2009 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

Need tel number for manual


You listed this under a Bissell Lift-Off so I am assuming your looking for a Bissell manual. You can reach Bissell at (800) 237-7691or you can download your manual below. Your unit should be a 3750 or a 3760.




http://www.bissell.com/Product_Search.aspx


Dec 15, 2008 | Bissell Lift-Off(R) Revolution(R) Turbo...

1 Answer

Replacement wheel


The rear number is 2036627, there is no side casing, you would have to replace the whole back, which Bissell isn't making avaiable. But o get the wheel, you might try bissell.com and see if you can order direct, or try a local repair shop to see if they will order it for you.

May 06, 2008 | Bissell Lift-Off(R) Revolution(R) Turbo...

4 Answers

Bissell Lift Off Broken Belt and Brush Roller


I had the same problem. I found that the brush actually melted to the end cap (the one with the square/ovalish end). I was able to pull it off with some force and applied some WD-40, but that only worked for one more use. The brush has again melted to the end cap and it is too deformed to try and fix. I suppose I will have to search for a new brush, but this model obviously has some innate flaws.

Feb 14, 2008 | Bissell Lift-Off(R) Revolution(R) Turbo...

1 Answer

Bissell Lift-Off(R) Revolution(R) Turbo Upright.


If you have a rubber smell, then the belt is slipping, does the brush roll turn freely while holding the ends? If not then replace it, part #2036619, if it is ok, then the belt has strectched and is slipping under load, part # 2106679, Style 8.

Jan 20, 2008 | Bissell Lift-Off(R) Revolution(R) Turbo...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...