120vac only 60hz 240wMilford Maine 01757 800 557 4825
SOURCE: Need plastic handle on Rival Crockpot lid.
J'aie un crok pot Bravetti de 7 pintes, c'est une petite merveille jusqu'à aujourd'hui car une de mes poignées s'est cassée lors de son utilisation. Je ne l'aie pas cognée, j'aie seulement pris mon crock pot ( qui était en pleine cuisson depuis 4 h00) par les deux poignées pour le changer de place sur mon comptoir de cuisine et crack, la poignée m'est resté dans les mains. Je n'ose pas imaginer ce qui aurait put arriver si il y avait eue un enfant près de moi lors du déplacement de mon crock pot Bravetti 7 pintes en inox. J'aurrais pu brulé quelqu'un pour le reste de sa vie....ATTENTION lors du déplacement de votre crock pot car les poignées ne sont pas solide du tout, je suis vraiment décue car j'adorais utiliser mon crock pot mais à partir de maintenant.....je vais y penser à deux fois avant de m'en procurer un autre Bravetti 7 pintes en inox.
Lyne
Abitibi
SOURCE: Need plastic handle on Rival Crockpot lid.
I am Jo Anne Gomez who posted original problem and thought the problem was resolved with husband putting on a knob he found at the hardware store. Just wanted to let you all know that the handle we thought would solve the problem DID NOT....after he replaced the knob and we did another roast in it the lid totally shattered after we'd cooked another roast (luckily the glass did not get into the food), however, this is just a BAD PROBLEM and these lids should ALL be recalled. I have seen, just recently, the exact same crock pot and lid being sold for much less. I think that these crock pots should not even be sold but taken off the market to prevent lawsuits or horrible problems. Just wanted to let you know our solution did not work and Rival was not helpful at all.
SOURCE: need lid to oval slow cooker model# 84357
You can buy one here.
http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3072&secid=54&linkon=subcategory&linkid=31
Good Luck and Please rate FixYa!
SOURCE: Need plastic handle on Rival Crockpot lid.
For what it's worth, when the handle on my mother-in-law's crockpot broke, I went to Home Depot and bought a cheap wooden drawer knob (about $1 as I recall). I put a plastic washer between the knob and the glass and another under the screw head from the bottom (to prevent cracking the lid), tightened the screw and good as new.
SOURCE: Plastic handle Rival slow cooker model 38511 broken
The problem is the threads strip on the bolt and nut. I took these to Home Depot's specialty fastener section (the one with the drawers of stuff) and purchased a nylon bolt and nylon wing nut and solved the problem. I is easy to remove for cleaning and all is dishwasher safe.
189 views
Usually answered in minutes!
×