Question about Uniden Cordless Phone

2 Answers

Not showing the area code when people call

Not showing the area code on the display
when people call

Posted by on

  • cathy_white Jul 16, 2009

    doesn't matter where they call from..no area code..I think it may be a setting on the ph under area code, may have to change it to 000..that's what I was told to try.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If they're calling from the same area code that's set in your "Global Setup", then the area code won't show.

Where I live, you have to dial the area to call them back, so I set our area code in the phone's Global Setup to 000.

That worked and now I can scroll through caller ID, see the whole 10-digit number, and return all calls (w/area code) with no problem.

Hope that helps!

Posted on Aug 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

R they calllin from the same area

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is trouble code 55pt6 on harley davidson 2011 fxdc


It's NOT an error code.

When you first go into diagnosis mode, the display shows "DIAG"
When you push the odometer reset button the display changes to "PSSPtb" (Not 55PT6...you're missing the flashing "P" in the front).

These are the different modules (sectors) that the display can show, with the flashing one being the one ready to show the error codes in THAT ONE SECTOR!

The correct procedure for displaying error codes is:

1 - Turn the ignition switch to off & run/stop switch is to run .
2 - Push odometer reset button in & HOLD .
3 - Turn the ignition switch on and then release odometer reset button . The background lighting should illuminate & the speedometer needle should sweep it's full range & indicator lamps ( battery , security , low fuel , check engine and cruise ) should illuminate . The word "DIAG" should then appear .
4 - Push the odometer reset button once and you will see the selection menu "PSSPtb" (this is what you are misreading as "55PT6", without accounting for the flashing "P") with the first P flashing .
5 - Each letter represents a area of the diagnostics module . The module that is flashing is the one you are going to check . To move from one letter to the next you must push the odometer reset button one time . ( from P to S to SP to t to b and back to P , ect ect )
P = ECM (main computer "brain")
S = TSM/TSSM/HFSM (turn signal/security, etc)
SP = speedometer
t = tachometer
b = ABS codes (anti-lock brakes)
6 - To get the DTC code in a area of diagnostics you should PUSH & HOLD the odometer reset button in for 5 seconds and the release . If there are any DTC's the code will be displayed or the word " none " will appear if there are no DTC's. Push the odometer reset button again to view any additional codes if they exist.
7 - Record the codes .
8 - If DTC's are NOT to be cleared , press and release the odometer reset button . Part # of module will be displayed. This number IS NOT an error code!
9 - If DTC's are to be cleared for that module , PRESS & HOLD the odometer reset button until " clear " is displayed .
10 - Press and release the odometer reset button to continue to the next module .
11 - Turn the ignition switch off to exit the diagnostic mode .
12 - If the run/stop switch is in the "OFF" position, No RSP (no response) will display. Also in the modules (sectors) where there is no component to give a signal/reading (such as if you have no tach, No RSP will show in the tach sector. Same with the "b" sector if you do not have ABS brakes).

Aug 30, 2014 | 2010 Harley Davidson FXD Dyna Super Glide

1 Answer

UE displayed on panel westinghouse 708 washing machine near end of cycle shows 6 mins left on spin then shows UE, cannot go into normal cycle.


I WOULD TRY TO LOOK AT THE DRAIN PUMP ASSEMBLY ON THE UNIT.... IT IS EITHER STOPPED UP OR NOT PUMPING FAST ENOUGH OUT DUE TO DEBRI IN THE PUMP AREA... GAIN ACCESS TO THE DRAIN PUMP AREA AND REMOVE HOSES AND LOOK INSIDE AREA.
the code data base for this is saying ue = drain failure... hope this helps you out

Jan 06, 2011 | Westinghouse Washing Machines

1 Answer

I have nokia 6303c O2 phone and whe i put my card T-MOBILE MK enter my pin and show enter restriction code.How can i fix it and work?ty


Hi, the only way to fix a phone displaying restriction code is to unlock the phone, cause where you are the phone does not have the ability to work in that particular area you are. So when you unlock the phone , it will work.
Phones with restriction codes are encoded to work in a particular area even when you get to another country it will not work except you remove code. By unlocking the code.

Sep 13, 2010 | Nokia 6303 Cell Phone

2 Answers

How do I set time/date?


Hello! This unit receives and displays date and time transmitted by your local phone company, via caller ID. Date and time can not be set.

Guru................saailer

Jan 08, 2010 | RCA 25110RE3 Phone

1 Answer

It does not display the area code on the caller ID


Somewhere, you told it your area code. Take that part out or put a different one in and it will show 10 digits.

Carl

May 19, 2009 | Uniden Cordless Phone

1 Answer

I have caller ID with phone company and we recently, in our area went to 10 digit local dialing in our area.My Uniden cordless phone tru9488 still only shows 7 digits on the call display. one other phone...


Somewhere, like on pdf page 48 there's a note about 7 digit dialing. In MENU GLOBAL SETUP AREA CODE it displays yours. Press DELETE and OK and it goes away.

Here's the manual: http://www.uniden.com/pdf/TRU9488om.pdf

Carl

Oct 23, 2008 | Lands Phones

4 Answers

Motorola razr v3m from verizon


I think it is best to have them exchanged the phone...but try doing a master reset and master clear

Dec 19, 2007 | Motorola Mobility RAZR V3m Cellular Phone

1 Answer

Caller ID set up and poor audio quality


Set up the callers in your contacts. You must have the area code for the name to show up. You must dial the area code for the name to show up when dialing out.

The hearing problem could be the person you are talking to, if your volume is all the way up. If you are sure that it is you I would talk to a motorola technician. Let me know how it goes.

Cynthia

Nov 04, 2007 | Motorola Mobility RAZR V3

1 Answer

AREA CODE


Just purchased the GE 25922 today. Looks like you can skip (ignore) the option to enter an area code.

United States' Area Codes are three-digit numbers. If the phone 'requires' entering a number you can use any three digit number. The purpose of this option is to display a local telephone number with only the 7 digits.

Example:
603 - 123 - 4567
'603' is the area code
123-4567 is the 7-digit local number.

If the area code option is programmed to '603', then if that number called '123-4567' would display on the Caller ID display.
Which now reminds me: you would need to also subscribe to Caller ID with the Telephone Company for the numberic display to occur.

Oct 27, 2007 | GE 25922 Cordless Phone

1 Answer

Ge cordless 900 mhz home phone


What is "Bell" and "Cogeco"? Did you change phone line provider companies? If so, you would need to ask them if it's possible to change. You are getting the information they are sending you. I do not believe the information is being altered by your phone.

Jun 19, 2007 | GE 21028GE3 Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...