Question about Compaq 310640-001 Keyboard for Presario notebook PC 3000

1 Answer

A continuous sound is comming out at the time of opening the computer. When start button is clicked a continuous sound is comming unless I close the window.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 942 Answers

Hi...

if this problem occurs, the main topic is the RAM which is still beeping, so you need to remove the RAM first after that, you should clean the dust in around the RAM, Since you've already done cleaning, just reinsert the RAM to their socket, or else try the another socket, after youve reinsert the RAM, try to turn on your computer, if the same things happen the RAM have defect, so you need to replace the RAM.

Hope it may helpful for you.

Regards
PCmania

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sandisk instructions


Which operating system ?
Encryption is a method of preventing unauthorized access to computer files.
When you apply encryption to a file, the file is altered so that it cannot be read by others, unless you have given them an encryption key.

Windows XP supports encryption through EFS, the Encrypting File System.
If you have encrypted a file on your Windows XP computer, but no longer want or need the file to be encrypted, you can remove file encryption by changing the file's properties in Windows Explorer. Locate the file from which you want to remove encryption in Windows Explorer.
Right-click on the file, then click the "Properties" link in the context-menu.

This opens a Properties window.
Click the "Advanced" button in the attributes section of the Properties window.

This opens the Advanced Attributes window.
Click to uncheck the box next to "Encrypt contents to secure data" in the Advanced Attributes window.

Click the "OK" button to close the Advanced Attributes window.
Click the "Apply" button in the Properties window, then click the "OK" button.

This closes the window and completes the encryption removal process.
Open Encrypted Files

Windows XP supports file encryption through EFS, the Encrypting File System.
You can encrypt files with EFS so that only you and designated users can open them.

You open files that you encrypted just as you would any other files.
However, you cannot open files that another user encrypted with EFS, and other users cannot open files that you encrypted, unless the user trying to open the file has been added to the list of authorized users for that file.

You can authorize users to open encrypted files using the Windows XP EFS management tools.
Click the "Start" button, then click the "My Computer" icon on the Start menu.

This opens the My Computer window. Navigate to the encrypted file for which you want add an authorized user.


Right click the encrypted file, then click the "Properties" link in the context menu. This opens the Properties window.

Click the "Advanced" button in the Properties window.
This opens the Advanced Attributes window.

Click the "Details" button in the Advanced Attributes window.
This opens the Encryption Details window.

Click the "Add" button in the Encryption Details window.
This opens the "Select User" dialog box.

Click the user you want authorize to open the encrypted file, then click the "OK" button.
This closes the dialog box.

Click the "OK" buttons in the Encryption Details and Advanced Attributes windows to close them. Click the "Apply" button in the Properties window, then click the "OK" button to close the window and complete the process.

Apr 09, 2014 | SanDisk 64GB USB 2.0 FlashDrive Cruzer...

1 Answer

Bosch integrated microwave doesnt start/close


Door latch settings are out because door slamming and abuse of unit

Dec 02, 2013 | Bosch Microwave Ovens

2 Answers

I need to restore my computer to factory settings


Ok, first, you are asking a very interesting question since you have Win7 HP 64bit, but you do not know how to reset to factory settings? First, why do you have a 64bit version of Win7? Most people pay a processing penalty for this, so I do not understand, unless you run Fourier Analysis on your screensaver :P
My next issue is I am not sure what you mean by factory settings? Normally this means performing a full new install without data backup, etc... If I recall my Windows manual correctly, aside from backup/restore, which it does not sound like you have that setup, there is no other magic button to push to get to factory settings, unless of course you have a recovery disk and know your way around that. Sounds like a full install is warranted, you probably should make sure any data you have is backed up somewhere before doing that though, or you will lose it.

May 22, 2011 | Microsoft Windows 7 Home Premium 64BIT...

1 Answer

The camera has not been used for some time. First up it would not open at all. Then following clues in support response t4613896 fix 1,2 and 4 I got the lens out, grabbed it before it retracted and rotated...


Unless you're a professional photographer who depends on the equipment for your living, don't worry about it and continue clicking away. If the worst happens and your camera fails, your life will continue....maybe even with a new camera.

Jan 25, 2011 | Cameras

1 Answer

Purchased a new ThinkCenter desktop computer and my Logitech X-230 speakeers will not work with it. Help! Ken


Probably your problem is your PC audio device not your new speakers.

First verify you see a small sound icon sound3.gif or sound.jpg in the Systray (generally at the bottom right hand corner of your screen). If this icon is missing follow the below section.
Windows XP

  1. Open the Control panel
  2. Open the "Sounds and Audio Devices" icon.
  3. Verify the "Place volume icon in the taskbar" checkbox is checked. If this option is not available or is grayed out, skip to the next section of this document.
  4. If you were able to check this box, click ok and close out of this window and the Control Panel.
  5. Double-click the sound icon in the Systray and verify that all the sound volumes are mid-way or higher.
Also looks like there are some corrupt system files on the computer I would suggest that you run SFC scan which would scan for corrupt system files on the computer and replace them.

Steps to perform SFC scan:
1. Click the Start button
2. From the Start Menu, Click All programs followed by Accessories
3. In the Accessories menu, Right Click on the Command Prompt option
4. From the drop down menu that appears, Click on the 'Run as administrator' option
5. If you have the User Account Control (UAC) enabled you will be asked for authorization prior to the command prompt opening. You may simply need to press the Continue button if you are the administrator or insert the administrator password etc.
6. In the Command Prompt window, type: sfc /scannow and then press Enter
7. A message will appear stating that 'the system scan will begin'
8. Be patient because the scan may take some time
9. If any files require replacing SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If everything is okay you should, after the scan, see the following message "Windows resource protection did not find any integrity violations"
11. After the scan has completed, Close the command prompt window restart the computer and check.
The scan may take some time, so be patient. Windows will repair any corrupted or missing files that it finds. If information from the installation CD is needed to repair the problem, you may be prompted to insert your Windows Vista / 7 installation disk.

Dec 01, 2010 | Logitech X-230 Computer Speakers

2 Answers

No voice recognition


You must have already set up and trained a user with the Dragon NaturallySpeaking software prior to transcription. Make sure that the Digital Voice Editor (DVE) software is not opened prior to starting these steps.
Open the Dragon NaturallySpeaking software.
The Dragon Bar window opens. From the Dragon Bar menu, click the Sound button.
From the Sound button, select the Transcribe Recording menu item.
The Transcribe a Recording dialog box opens.
Click the large square button to the left to start the DVE software.
The Digital Voice Editor window opens.
NOTE: If the file you want to transcribe is still on the Integrated Chip (IC) recorder (which will be reflected on the left side in the IC Recorder window), you will need to connect the IC recorder to the computer using the supplied USB cable, or transfer the file to the computer.
Select the item you want to transcribe from the PC window on the right side.
Click on File from the tool bar.
Select the Voice Recognition menu item.
The Converting.. Dialog box opens.
The Transcription Options dialog box opens.
Click the Transcribe button to continue.
The Transcribing window and Dragon Pad window opens.
The text is displayed while the transcription is in process.
NOTE: Once the transcription is complete, it may be necessary to make grammar, word, punctuation, and formatting adjustments.
To save the text file, click on File from the tool bar.
Select the Save As. Menu item.
The Save As dialog box opens.
Browse to the folder location to which you want to save the text file and double-click on that folder.
The folder you chose should now be showing in the Save in drop-down box near the top.
Type in the desired File name in the File name drop-down box towards the bottom and then select the document type.
Click the Save button.
Click the X (close) button in the upper-right corner to close the Dragon Pad window.
Click the X (close) button in the upper-right corner to close the Digital Voice Editor software.

Feb 10, 2010 | Sony ICDSX68 Digital Voice Recorder

1 Answer

When I hit the 'open' button the face continues to cycle


ribbon tape sounds bad. it goes from the units main board to the detachabel faces rear mounting plate , u can inspect it for cracks , most of the time theyre visibel from looking under the unit while face is open

Oct 17, 2009 | Pioneer Car Audio & Video

1 Answer

My garage door will not close unless...


Check your down limit switch and even your up one too almost sounds like one is stuck one way or the other.

Jun 19, 2009 | liftmaster Chamberlain Garage Door Opener...

3 Answers

Machine won't start and clicks if turned on with door open


 
Ok, this is the fix:


No payload. Close the door. Press off, then press on. Then enter a program starting by selecting the fabric and the others as usual. Do not press start, instead press the slip button to advance the programme to the very last phase, ie drain and empty. Then press start. It will perform this operation with no load and pump out the “no water”. This part takes 5 minutes. After the 5 mins the programme will end and the machine will beep annoyingly, but the computer will be reset and you can clear the program and use the machine as normal.


Why?


I had the same problem. The stupid computer inside remembers the program whilst it’s off and unplugged. What has happened is you accidently pressed start and start again to pause it in very quick succession. This confuses the computer and it thinks that a program is in progress. This is why it wants to close the door. There is no problem with the latch (unless it is a separate problem). You have to let it play out a program to reset it, which is why you can play the very last “drain” segment.


Question.


Presumably there’s a way to reset the computer either by a secret button combo or shorting out two pins from the computer box. I don’t know. If someone knows this please tell me.


Good Luck!


 

Jun 07, 2008 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Compaq 310640-001 Keyboard for Presario notebook PC 3000 Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...