Whats is fh code - Washing Machines

The indoor EEPROM unit
1 ChecK whether there are false weld or bad connection etc, between the EEPROM chip block and electronic control board,
2 check whether the EEprom chip is broken foot and the direction of the installation is in line with EEPROM block.
3 When the procedure of EEPROM chip and itself have fault the code FH will appear. That is a need to replace EEPROM chip.

need a model # for right repair help and the exact code FH is not listed sound like defrost issue

Display shows F20 or FH - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...fh-front-load-...

Whirlpool Home AppliancesQuestion: Display shows F20 or FH - Front-load washer. Answer. Image. or. Image. or. Image. This error code indicates a water supply problem. Are both the hot ...

whirlpool duet error code FH - Appliance Repair Forum

forum.appliancepartspros.com > Appliance Repair Help > Washer Repair

Jan 5, 2009 - 10 posts - ‎1 author
... Repair Help > Washer Repair » whirlpool duet error code FH .... FH No water detected entering machine or Pressure switch trip not detected. Whirlpool Duet diagnostic code C:03 error code FH
1 post
Dec 5, 2014
Whirlpool Duet Washer HF Error Code
3 posts
Jun 10, 2013
FH Error Code on Whirlpool Duet Washer
2 posts
Mar 11, 2013
FH error code
9 posts
Sep 13, 2008
More results from forum.appliancepartspros.com

Stumped on error code FH for Whirlpool Duet front load washer .

Driveline - Specifications : Volvo Trucks - United Kingdom ...

www.volvotrucks.com > ... > Specifications

Volvo TrucksFind all the driveline specifications for the new Volvo FH, including the engines, I-Shift, ... 12-speed splitter and range gearbox with automated gearchanging system. ... Supplied as standard with I-Shift and gives the gearbox its basic functions. .... Pleasebe aware that if you change your cookie settings, we can no longer ...

[PDF]Volvo FH series Product guide - Volvo Trucks

www.volvotrucks.com/.../Trucks/...fh.../Volvo-FH-Series_...

Volvo TrucksVOLVO FH AND VOLVO FH16 PRODUCT GUIDE volvo fh series .... You can literally steer the truck with one finger. This not only gives you complete control of the ... By constantly receiving information about vehicle speed, ..... 335 mm under thedifferential. ... Please note: this is not available on a right-hand drive (RHD).

[PDF]Manual New FH - Volvo Group

www.volvogroup.com/...Trucks/Manual%20new%20FH%20f...

AB VolvoIf you have any questions or want to know more about your truck, please contact your. Volvo dealer. ... network across Europe, we can help you with repairs to your truck and its .... Differential lock. .... manual gives you an overview of the .... Adapt the speedand maintain as even a speed as possible. 02. DRIVING TIPS. 16.

Check the connection between The inlet valve, pressure switch, drain pump, flow meter, and connection to the ccu.

Hello,

The FH error code means that the washer has not detected any water entering it. This tip i wrote relating to the FH code covers what to checkto fix it.
http://www1.fixya.com/support/r10423905-fh_code_means_duet_epic_front_load


GENE

The error code FH means no water is detected entering the machine which can be due to a faulty flow meter not registering the correct amount of water that has passed through it or the pressure is not tripping from the empty position to the full position when the correct water level has been reached. Your machine is definitely made by Whirlpool like other Kenmore and Maytag washing machine so they are basically the same and troubleshooting is then the same. The link below contains the detailed troubleshooting of this error code for a Whirlpool Duet and should be applicable to your machine.

Error Code FH on Whirlpool-made Front-Load Washers

the only thing you can do is to go to the manufactures website and download the user manual and check the trouble shooting guide for a possible cause for this problem eric

go 2 repair clinic on line, same codes for whirlpool duet repair help then error code tab

FH is a water inlet related issue, make sure your cold water supply is working correctly, sounds as if its trying to rinse(cold water) and has no water to do it