Question about Bushnell SCOUT 1000 Rangefinder

1 Answer

I can't get it to bow or rifle mode

When I hold the mode button for five seconds to get the setup application all that comes up is "Y" or "M" and I can switch back and forth between them. I can't get anything else, no bow or rifle mode which i need especially bow mode.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Look on the back of the rangefinder......Its a very small strip that has the model number, serial number, and date of manufacture. If it sez.....20-1932 you have a "bow and rifle" rangefinder.....!!!! If it doesn't have model number 201932. You don't have that capability. Read your manual, check the unit for the model type.
Part 2: Try holding down the "FIRE BUTTON" for more than 5 seconds....see if the the "setup" comes across the display screen........(read the manual) The unit should have came with a ballistic disk. If you don't have one call Bushnell and get one. (800.423.3537) It has a lot of good info on it.

Good Luck to you David!!!

mr tech geek

dont forget to rate....

Posted on Jul 17, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is safe mode

cold y7 me safe mode dikha raha he

Feb 26, 2012 | Samsung Cell Phones

2 Answers

How can i reset when the MAINT REQD indicator comes on?

Turn igniton to on position and put odometer in trip mode, turn off ignition.

Hold trip button in and hold it in as you turn ignition to on position, it will flash

Turn off ignition.

Maintenance light should go and stay off

Read more:

Apr 25, 2011 | 2007 Toyota Camry

1 Answer

How to configure and setup Tripp Lite SmartPro UPS "Out of the box"?

hold off button until in bypass mode comes on. to setup hold scroll and select buttons down together, until it goes to setup mode. make selections. exit. then hold on button until it beeps and comes on through diagnostics.

Mar 10, 2010 | Tripp Lite Internet 750U (internet750u)...

1 Answer

Jailbroken iphone gets stuck on apple screen and somnetimes on very lew red battery screen

    Try the exit from DFU mode
  1. Step 1 Locate the "Power" button. This button will be at the top right of your iPhone, next to the sim card slot.
  2. Step 2 Locate the "Home" button. This button will be located at the bottom center of your iPhone.
  3. Step 3 Select and hold both the "Power" and the "Home" button.
  4. Step 4 Hold both buttons for five seconds and then release them.
  5. Step 5 The iPhone should automatically shut down and reboot into normal mode. If not, hold both buttons for another 5 seconds.

Dec 18, 2009 | Apple iPhone Smartphone

2 Answers

How do I reset my oil light on my 2004 Buick Rendezvous?

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.

Sep 07, 2009 | 2004 Buick Rendezvous

1 Answer

Sony dav dz100 won't eject dvd

Press standby button to turn on the set, select dvd function then press and hold STOP and EJECT button for five seconds or more to UNLOCK cd slot. You will see UNLOCK in display. 

Jan 02, 2009 | Sony DAV-DZ100 System

1 Answer

I did something in setup mode now I hve no picture

Press and hold the off button on the unit for five seconds and it will reset itself to default satting.

Dec 01, 2008 | AOpen DVD Player (AOPDUW1608CG) Burner

2 Answers

Stuck with progressive scan mode

My dear friend try with this,turn on the dvd take out the disc open the tray now push for 5 seconds the button stop.Good luck.

Jun 18, 2008 | Zenith XBV243 DVD Player/VCR

1 Answer

Amps and sub-woofer not working

Enter into the Audio Setup mode(press and hold volume button for at least 1 second). Next, repeatedly push the volume button until the display shows "2 ZONE". Make sure this feature is turned off. Hold the volume button again for at least 1 second to leave Audio Setup mode.

Now you need to make sure the Subwoofer Output is turned on. Do this by holding down(AM position) on the control knob(toggle stick) for at least 1 second. Each time the button is pressed, the Subwoofer Output is turned ON/OFF. the display should show "SW ON".

Next, you can go into Audio Control mode(press but do not hold volume button). Keep pressing on the volume knob until "Sub-WLevel" is displayed. Here you can adjust the amount of gain for the Subwoofer ranging from -15 to +15.

I hope this fixes your problem with it.


Dec 31, 2007 | Kenwood Excelon KDC-X789 CD Player

Not finding what you are looking for?
Bushnell SCOUT 1000 Rangefinder Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers


Level 3 Expert

102366 Answers

Mark Campeau

Level 1 Expert

44 Answers

Are you a Bushnell Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides