Question about Ulead Videostudio 8 for PC

3 Answers

I can not install easycap driver.

I have a Vista 64 bit SP2 system. I inserted disk without plugging in. Windows can not install the driver. I tried downloading the driver from Vidblasterus.com, putting it in the admin download folder. Still no luck. I tried going ahead and installing ulead and had no problem there ... other than of course - it can not capture through the easy cap.

Please help.

PS I originally tried Roxio's product but had the oposite problem ... driver installed fine but their program shut down before starting.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I also just received my Easy Cap today (for a 64-bit Vista PC) and a little hunting online revealed the following web page which has a link to some drivers for Vista 64-bit:

http://dekonass.no-ip.biz/?p=462

The link is just under the picture. Worked for me.

Good luck

Posted on Jul 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 89 Answers

Easycap dc60, like everyone found out it doesn't like to play with windows 7 64bit.

Try this site
STK1160 Driver

https://visser.io/2015/06/easycap-drivers-for-windows-8-1/

aka Easycap 4Ch USB DVR W10, W7, x64)

Posted on Jun 20, 2016

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

On the installation cd of easycap there is a folder>DRIVERS>setup> then after that on the same folder below is stkATVAp icon 1 is 98 & the other is 2X (thats 2000) double click the 2x one and then go back up the third icon from the top in the same folder is stkATVAp > right click and send to desktop as shortcut>then double click and go to video setup and chose composite video1>then connect your camcorder thru the easycap>and press play on your camcorder-but make sure your cam is set to VTR only then it plays the video (as everybody knows that)>then go to option on top>capture video - thats it! Ur up & running>U don't even need Ulead to make it work or capture>all the files you capture are saved in my documents - simple!

THE ABOVE INSTRUCTIONS ARE ONLY FOR VISTA.

Rgds
Rocky

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Windows7 64bit & EasyCap directions


Ulead Video Studio SE DVD how to run on Windows7 64 bit systems by Not you. Drivers updated now has drivers for XP Vista and Windows 7 7/16/2010 Getting started,you will need another program its called USB-AVCPTSetup_For_Win7 you can get it here... download links are at the bottom of page.Do not install at this point save to your desk top! Ok your ready Do not plug in your Easy cap usb drive. 1. Put the EasyCap disk into your CD Rom When auto play starts click Run HAutorun.exe a window will open DO NOT INSTALL THE DRIVER !!!! 2. click Install Video Studio,complete the install adding your code with no driver reboot when asked. after reboot remove the disk you will not need this anymore. 3.DO NOT INSTALL THE EASYCAP USB DRIVE YET. 4. Install the software you saved to the desk top (USB-AVCPTSetup_For_win7) reboot your system. 5. Plug in the EasyCap USB stick and wate till the driver installs this will be done auto,in a few seconds. 6. Sorry to say but you need to reboot now. leave the USB drive in its port. You are now installed but your cam will only show a black screen at this point,its ok we are now going to resolve that. Start the Ulead Video Studio. During the start up you'll have the choice of VideoStudio Editor or Movie Wizard click the 16:9 ckeck box at the bottom then click VideoStudio Editor. New window will open click Capture,now look for capture video button on the right side of the black screen,click it Just to the right you will see an Options button click. A drop down will show,look to see if input source is in dark letters,if so open and set source to NTSC/M and composite video is checked. If the input source is greyed out,open Capture properties directly under the input source,a new box will open click properties a new box will open this box will have 3-4 tabs you only need the first tab called Image tab under video sources click ntsc/m and composite video click ok click ok again thats it you should now have video,After any restart you will need to reset ulead up again,you should be good to go...... Hope this helps :-} Here are some pic's to help.Note after the instalation,if you move the Easycap usb drive from the usb port it was installed in and input it into any other port it will not work,the driver will need to be reinstalled!!! 09c750d.pnge0aeff9.png78f955a.png New download links For Windows XP/VISTA/7 32-Bit, please download Windows 7 64-bit This web page I have not goten any link to open but thought I'd add it so you all can see it,if anyone gets it open please post any or all links for us all. Thats all for now I'll upload more as I get them. ps working with a company rep now,update for easycap d60 4 input style,If not getting a picture on input 1 move to 3 for setup and one camera setting.

on May 25, 2010 | DekCell EasyCap USB 20 Video Capture...

1 Answer

I have installed the cutwork software, I use Creative Drawings as my software, but my cutwork program does'nt want to work. What can be wrong and how do I correct it?


assuming its windows remove the usb cable an you should hear a donk donk.
put it back in an you hear dnk donk.
meaning its seeing the machine .. or not
run a test on the driver

--------------------------------
You'll need the following service pack to use BERNINA Art Design V1 under Windows® 7 or Windows Vista™ SP2 (64-Bit) operating system: BERNINA Art Design V1 - Service Pack 2 for Windows® 7 / Windows Vista™ SP2 (64-Bit) OS(Aurora driver for 64-bit Windows® operating systems and EConPC 3.1 & ADX 7.14 are included) You'll find them at www.bernina.com\downloads

May 03, 2015 | Computers & Internet

1 Answer

I need SP2 update for my HP computer (Vista)


Make sure that your system is running Service Pack 1 before you install Service Pack 2.



Windows Vista SP2 32 bits (348.3 MB)
Language: English, French, German, Japanese or Spanish
http://download.microsoft.com/download/E/7/7/E77CBA41-0B6B-4398-BBBF-EE121EEC0535/Windows6.0-KB948465-X86.exe



Windows Vista SP2 32 bits (475.5 MB)
Language: All
http://download.microsoft.com/download/F/B/9/FB9F0DF8-4CE2-416D-9D08-BABC7EA48F85/Windows6.0-KB948465-X86.exe



Windows Vista SP2 64 bits (577.4 MB)
Language: English, French, German, Japanese or Spanish
http://download.microsoft.com/download/4/7/3/473B909B-7B52-49FE-A443-2E2985D3DFC3/Windows6.0-KB948465-X64.exe



Windows Vista SP2 64 bits (745.2 MB)
Language: All

http://download.microsoft.com/download/5/7/8/57804D8A-3C84-4DD4-867C-748050DDED9D/Windows6.0-KB948465-X64.exe

Apr 08, 2013 | Computers & Internet

1 Answer

My webcam microsoft vx-500 is not working..what will i do to use this webcam ??


Hi there,
You can download the drivers for the webcam from the links mentioned below
Windows XP (32 Bit) LifeCam 3.5 32-bit for Windows XP SP2 or higher (excluding 64-bit)
Windows XP (64 Bit)
LifeCam 2.04 for Windows XP 64-bit
Windows Vista (32 & 64 Bit) LifeCam 3.5 32-bit and 64-bit for Windows Vista
Windows 7 (32 & 64 Bit) LifeCam 3.5 32-bit and 64-bit for Windows 7
Simply download the driver and run the setup it will install your camera, if it does not detect the camera , disconnect the camera and plug in again and it will load the drivers
If you require more assistance regarding this, feel free to contact
regards, BA

Jan 13, 2011 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Easycap i can't intall thediviceEasycap capture model no..DC60


I have checked these files and they appear clean to me.. please exercise caution and scan them yourself.

32 bit driver
http://jartim.wippiespace.com/Programs/STK1160Drivers.zip

UNOFFICIAL 64 bit driver
http://jarmot.wippiespace.com/Drivers%20for%20Vista%2064bit.zip

64 bit Vista and Windows 7 driver
http://www.sabrent.com/drivers/USB-AVCPTSetup_For_Win7.zip

Aug 05, 2010 | DekCell EasyCap USB 20 Video Capture...

2 Answers

Finger Print Reader is not Working on my Acer Aspire 5738 laptop with Windows XP installed on it. kindly


you need to install all the software of this Finger Print Reader and update all the drivers or install the driver.good luck

Jun 15, 2009 | Computers & Internet

1 Answer

Cannot download or install kodak esp3 aio drivers or software


either you have 64 bit op system or you dowmloaded the wrong driver on accident.

if this information helps please use fixa when rating. thanks

Apr 25, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

2 Answers

Have EasyCap video capture device and vista x86


I have windows vista and my drivers load fine. Plug in the unit and the drivers load. I have the 4 camera easycap and the VCR easycap. Install drivers first before plugging in the unit. Restart computer, plug in unit, check device manager if there is a stk1150 loaded under image. My problem is getting small files from the recordings. I converted 2 mins of my daughters dance solo and it turned out 1.7gb AVI file without sound. Changing the options to mpeg or WV files will crash the program becuase something doesn't match. I need to play with it more to understand it better.

Jan 20, 2009 | Ulead Videostudio 8 for PC

3 Answers

Class installer cannot install device A4tech webcam PK-7MAR


unplug the webcam and try uninstalling the driver first then reinstall with this driver http://www.a4tech.com/ennew/driver/CameraA.zip
then restart your PC and plug your webcam again.

It should run on WinXP SP2, Vista ang 64 bit

Jun 04, 2008 | A4tech Xmaster PK-835 Webcam

Not finding what you are looking for?
Ulead Videostudio 8 for PC Logo

5,204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ulead Computers & Internet Experts

Aaron Hackbarth

Level 1 Expert

36 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you an Ulead Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...