Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Have a HE4t. Giving us a f 11 fault on display. what does this mean

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

F11 is a serial communication error between the main contol board and the motor control board.
Here is a list of things to check:

  • Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
  • Check the Drive system for any worn or failed components
  • Check MCU
  • Check CCU
  • Check Motor
  • Check Wire Harness

  • Unfortunately if you do not have the proper equipment, you cannot narrow the problem down. More than likely it is a main control unit problem but that is only the most replaced part on your unit.

    Posted on Jul 16, 2009

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    My 94 Nissan Altima ECU is giving code #21. This is for Ignition signal. Haynes manual says, "See dealer". It is also coding #11 - camshaft sensor.


    Code 11 crankshaft position sensor or Camshaft position sensor. Code 21, Ignition Signal, Diagnostic Tree . Best to take to dealer for repairs and to remove codes, the codes do not mean the units are faulty ,just there is a fault, could be just a bad connection.

    Mar 19, 2015 | 1994 Nissan Altima

    1 Answer

    Washing machine keeps stopping


    E20 not draining error. Since you checked filter at bottom right corner for blockages, then maybe the drain pump has gone faulty or something jammed in it. You can also check the drain hose for kinks or blockages. You can try blowing out any cloggs in the machine with an air compressor.

    Please let me know if you need any further help, otherwise good luck on fixing your problem.

    Apr 13, 2008 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

    1 Answer

    What does "sud" mean on the time remaining display?


    You used to much soap producing too many suds. Too many suds interferes with operation of machine. Read your owners manual

    Jan 06, 2013 | Kenmore HE4t 3.8 Cu. Ft. Plus Front Load

    2 Answers

    My kenmore elite smartwash/he4t


    The "F11" fault code will display if the Motor Control Unit (MCU) has an internal failure; repeating under or over voltage, or over current conditions. If failure occurs during high speed spin the door unlocks after 3 minutes. The MCU (Motor Control Unit) is located beside the motor. Here is the part to order.

    Dec 02, 2012 | Kenmore Elite 45986 Front Load Washer

    1 Answer

    Kenmore he4t washer shows f-11 error


    F-11 // WILL THEN APPEAR FDL CODE DOOR LOCK LOCK FAILURE, F-11 COMMUNICATION ERROR REPLACE MAIN CONTROL,, JUST REPL 3 TODAY ....

    Nov 28, 2008 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

    Not finding what you are looking for?
    Kenmore Elite 45986 Front Load Washer Logo

    145 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    fordexpert

    Level 3 Expert

    5467 Answers

    Mike Squire

    Level 2 Expert

    391 Answers

    Robert Rankin

    Level 2 Expert

    338 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...