Question about Vtech Cordless 6041 Phone

1 Answer

My phone has no dial tone, display has "no line" ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This will only fix the phone temporarily.
unplug it
wait up to 4 minutes
plug it back in
and it should work for a while.
if anyone has a permanent solution please post

Posted on Sep 09, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Phone line/phone jack problem

The wiring on the jacks is set up for a 2 line phone.

If you take the jacks apart, you will see either:
A) red, green, and black, yellow
B)white blue/blue white and white orange/orange white

You need to swap the pairs.
If there are red/green/black/yellow wires. remove the yellow/black and move them to where the red/greens are. Then put the red/green wires, where the yellow/black used to be.

OR, you need to swap the orange and the blue wires.

Posted on Dec 22, 2007

  • 1 Answer

SOURCE: display blank, no keypad tones, Emerson EMG900 phone

you must use a ac adapter which the phone doesnt come with or 3 double A batteries

Posted on Mar 19, 2008

  • 1 Answer

SOURCE: I pick the phone up, no dial tone. Display says

We called the phone company.....There was a problem up on the telephone pole. They fixed it, no charge.

Posted on Jan 25, 2010

  • 1 Answer

SOURCE: no dial tone and "line in use " message

Try the simple things first. Try a different phone. In my case, I had the phone company check - outside was fine. After two hours my phone worked. I figured out what happened in my case. Both phones were dead (battery). I think one died with the phone off the hook. once the phones were fully charged, the phone worked.

Posted on Mar 29, 2010

  • 37 Answers

SOURCE: My phone says line in use and no dial tone

I also, but my dsl is still functional...

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not dial out on pulse on one line, works on second line


try changing phone to tone dialing . one phone line has been setup for Decadic dialing and the other line may be setup for tone dialing.
If tone dialing is working on one line but not the other then get phone company to change the dialing type on the phone line.
Dual tone multi frequency is the technical name for tone dialing and is more efficient than decadic dialing or pulse dialing.

Jan 23, 2016 | Lands Phones

1 Answer

Hi my canon fax-JX500 displays 'line in use' and has no dial tone. Can you please tell me how to fix the problem?


Unplug your fax from the phone line. Plug in a phone. Dial tone? Yes? then either fax is bad or the phone wire is bad.

No dial tone? Phone line dead.

Aug 30, 2015 | Canon Office Equipment & Supplies

1 Answer

Phone displays error message "check tel line


The phone is not detecting dial tone on the line. Are you able to hear a dial tone? If not - disconnect the cable at the phone and plug into a different phone. If it works, then the problem is with the Panasonic phone - if it doesn't work - the problem is with the cable, jack, wiring, etc.

Mar 12, 2015 | Panasonic Lands Phones

1 Answer

Phone not working


Hi Pam,
Try these..1...remove your telephone line from base unit and fix it into a working land phone and check whether is it having normal dial tone.If it's having engage tone(beep beep...)remove paralleled phones and re connect to cordless base unit.
2.If line is ok (normal dial tone with full volume) & still display indicates line is busy, your main base unit must be having faulty components inside.Commonly these defects happen in thundering or surges through telephone lines.You have to take full set to a repair shop.
Rana.

Dec 28, 2013 | Gigaset As300 Twin Dect Cordless Phone -...

1 Answer

Handset displays "Line in Use" no dialing tone and


I can't get dial tone either. Let me know if you find a solution please.

Dec 12, 2010 | Siemens Gigaset 4015 Cordless Phone

1 Answer

Cannot get the pulse tone off the line and that prevents from voicemail access and call forwarding HELP!


In guessing that since your lines have defaulted to pulse dialing that you have an older Nortel system such as an 8x24 or a 6x16 system. That being said you'll need to program touch tone dialing on each line.

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
the display says A. Configuration
4 top line/feature keys are now used for programming
Press the show key (top right arrow)
the display will say1. trunk/line data
Press the show key (top right arrow) .
the display will say line 001.
Press the show key (top right arrow)
the display trunk data
press the show key (top right arrow) Press the next key 7 times(bottom right arrow) .
The display should say Dial mode: pulse.
Press the Change soft key (below the display).
the display should now say tone. press the heading key (top left arrow) to get back to "trunk/line data" repeat the steps for the remainder of your active lines
press Rls when finished

Nov 04, 2010 | NorStar M7208 Corded Phone

1 Answer

No dial tone pressing hook, NG and Poor line condition transmission report on sending and receiving. Confirmed good dial tone on line in and on phone on ext. Copy, display, everything else fine. I hear...


Hello,

Make sure that you have your telephone line from the wall jack plugged into the port on the fax that says "LINE" and that your telephone is plugged into EXT.

All your cables and jacks seem like they are working since your phone gets a dial tone, the onyl thing could be that the wires are mixed or the modem on the fax is broken.

Thanks,

Pat

Mar 27, 2010 | Brother Multi-Function Center MFC-240C...

2 Answers

I pick the phone up, no dial tone. Display says


We called the phone company.....There was a problem up on the telephone pole. They fixed it, no charge.

Jan 21, 2010 | Vtech Cordless 6041 Phone

2 Answers

Can't dial out


What are you getting when you try to dial out? Sounds or display wise? How are you dialing out? Do you access a line, dial 9 from intercom? The dial tone is probaly the phone system generated dial tone. With more information, I can help..

Oct 25, 2006 | Nortel Meridian 9417CW 2 Line phone

Not finding what you are looking for?
Vtech Cordless 6041 Phone Logo

Related Topics:

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...