Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Dryer no heat


Model # WGD9200SQ0 Mod # MU5132003

Posted by on

  • tdebat Jul 16, 2009

    sorry i failed to state it is a gas dryer.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

1ST YOU NEED TO SHIR YOU GET 240VOLT TO DRYER IF YOU ONLY GET 120VOLT THE LITE WILL COME ON AND IT MAY RUN. IF YOU ARE GETTING 240 THEN. UNPLUG DRYER TAKE THE LOWER PANEL AND USE A METER TO CK FOR OPEN PART ON ELEMENT OR ON T-STAT THE MUST BE CLOSE MOST PROBE LY WILL BE THE HIGTH LIMIT T--STAT OR 2ND GUS ELEMENT

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Whirlpool Duet dryer model WGD9200SQ0 will not power up, the light inside the dryer goes on when you open the door but when I push the Power button ... nothing. I would appreciate any advise on where...


There is a good possibility the over heat fuse is blown. It is normally in the back of the dryer, so you have to unplug the dryer for safety, remove the back, and look on the exhaust duct for the fuse. Usually it has blue wires on it. You can test the continuity with an Ohm meter. This fuse blows for a reason. Usually there is an overheat condition and that can be caused by too much lint in the dryer exhaust hose or pipe. There is a small chance it will blow from age and heating and then cooling. If you are not aware of how to work around electricity safely, do not attempt to repair this yourself.

Nov 04, 2013 | Washing Machines

1 Answer

NO HEAT ON KENMORE ELEC. DRYER MOD. 110.64992300


Hello,
There could be a number of problems with your dryer causing it not to heat. Here is a tip that I wrote about your problem...

http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

Heatman101

Mar 10, 2010 | Kenmore 64992 Electric Dryer

1 Answer

Mod: LGR5620KQ1 dryer keeps running. timer stays the same.


sounds like short to ground and feed back to timer

Aug 31, 2009 | Whirlpool Dryers

1 Answer

Gas dryer mod.# MDG6000BWW, Igniter lights but no flame


Replace the flame sensor on the side of the heat canister. You may also have to replace the gas valve coils.

Aug 27, 2009 | Dryers

1 Answer

Amana gas dryer mod #NGD5240TQ0 intermitten heat


i went to a local appliance store asked them for assistance. they were more than helpful and sold me the parts i needed. fixed the problem for under $30.00. i also didnt have to pay for their ADVICE !!!

Aug 22, 2009 | Amana Dryers

1 Answer

Kenmore Dryer-Mod.#11066514694-won't spin or heat


Hi,
This could be caused by an internal thermal overload switch. These usually have a limited life span in any appliance that uses heating elements. Try to locate the overload switch which usually looks like a small diode or resistor. You can determine if this is the cause by bridging the switch with a piece of wire, then trying the dryer once more.
Best wishes,
Graemevm

Jun 06, 2009 | Dryers

1 Answer

Moisture sensor does not seem to work


your heating element may be bad if your cycle completely finishes and the clothes aren't dry. If

Jan 28, 2009 | Dryers

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2286 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...