Replacement motor bearings for a genie shop vac/blower model# pb 15

hardware stores or anyplace that sells shop-vacs

Go here and enter your SPECIFIC Model Number:

Parts Lists

If that does not help, search GOOGLE for this:
Genie 20 gallon 4.0 shop vac power switch

Genie 20 gallon 4 0 shop vac power switch Google Search

Anthony

Go to this link,they should have what you need........

Genie shop vac wet dry vaccum parts Genie garage door opener universale...

I have the Genie 3000 which is a 20 gal. wet/dry vac with a 3.0 HP motor. I had bought at Home Depot some 20+ years ago. I bought a replacement filter at HD made by someone other than Genie and claiming to fit my model...but it did not fit...too loose to stay in place. I did track down some hypo filters that might fit...but at $28+ for the filter I decided it was time to get a new model with better and cheaper and available filters. I bought a Ridgid WD1451 14 gal with 6.0 HP. It is so much nicer and quieter. HD regularly carries the WD1450 for $99 or so. The WD1451 is the same model but also had the car vac hose and attachments (a $40 set) included for free. That was a limited offer probably no longer available. Get you a new one and enjoy it...I did...and I still have the Genie...but I think I'll toss it because it is too big, too loud, and I love this new Ridgid.

remove the cap that directs the air and insert the hose in there.

C.R.Laurence model GO118 filter is available through INTRO HOME IMPROVEMENTS and AMAZON.COM. This filter is made to fit the Genie 1.1hp Jetvac. Problem solved, thanks anyway.

Replace the motor... if you live in canada, go to canadian tire or part source they'll have what oyu need to fix it.

http://geeksquad.fixya.com/ThreadView.aspx?prdid=19255&thid=659916
Old red and black Genie Shop Vac
Posted by girl power on Jun 10, 2008
A Wheel or disk has come off of the motor. I would like to get a copy of the user manual to see if I can determine where it came off of. This Genie Shop Vac was given to us from my father-in-law.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check with the manufacturer Shop Vac to get an owner’s manual for the older Genie Shop Vac would be @ the Shop Vac Website and or Customer Service of which I will give you @ the bottom of the response. Other wise check with your local vac dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://shopvac.com/contact.asp Customer Service 570-326-0502 Phone #
Shop-Vac Corporation Customer Service 570-326-7185 Fax #
2323 Reach Road
P.O. Box 3307
Williamsport, PA 17701
Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Hi, you can find genie replacement parts on amazon, click here and take a look: WORKSHOP Vacs Suck It Up Get It Done. I hope this was helpful. Cheers