Question about HP Photosmart 2710 All-In-One InkJet Printer

1 Answer

Power supply for an HP 2710................

I was checking to see if anyone had a power supply for an HP 2710 and an HP 7310. I you have one please email me at and let me know what you want for them....... Thanks


Posted by on

1 Answer

Re: Power supply for an HP 2710................

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Any fuses in this printer? location please.

try unpluging the power supply for about 10 seconds and replug it. Sometimes i guess it just gets to where it does not want to turn on. If the light on the power supply is on, the above probably will not work. As far as I kow, there are no fuses inside the printer its self, if there are any, it would be in the power supply, but if the lite is not on in the power supply, then replace it after you try the first part of the answer.

Dec 29, 2014 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

My HP Photosmart 2710 keeps shutting down, either when printing, scanning, or sometimes just on its own. I can only get it to restart by removing the power plug from the power supply and reinserting it

The most common reason for this is that the power input in the printer has a bad solder joint.
Wiggle the power connector at the back while the unit is powered up.
If it goes off, then that connector inside the printer just needs to be soldered back down.
The other possibility is that the power adapter itself is failing, which is really hard to test without another power adapter to test it with.

Mar 19, 2011 | HP Photosmart 2710 All-In-One InkJet...

1 Answer

My HP office 7310 all-in-one says "warming up"


Here are some solutions that can help you resolve the issue.

Check the scanner light.
-press start copy color in the control panel of the printer, make a copy of any document you have, while doing that slightly open the lid to check if the light is visible, if the scanner moves withoout a light, contact the HP support and have it serviced. If there is a light, make sure that the printer is connected directly to a power outlet not to a power strip (this is to ensure that ebough electric currect is flowint to the printer). Repeat the scanning to check if the problem persist, if it does try another power outlet. If still the same try restart the printer, after restarting, while the printer is on, remove the power cable on the back of the printer then unplug it to the power outlet wait for about 15 - 20 secs then plug the cable to the outlet and to the back of the printer, then try scannin again. if still the same then do partial reset of the printer. Remove the power cable press and hold the # and number 3 keys while doing it reconnect the power cable then try to scan again, if the issue didnt resolve anything have the printer serviced by HP.

Hope this will resolve the issue.

Thank you for choosing fixya.

Mar 03, 2011 | HP Officejet 7310 All-In-One Printer

2 Answers

My Hp 7310 will not turn on, we purchased a new power source an when it was plugged in, there was a quick pop and it would not work

Pop could have been internal power source exploding. If the printer is new or under warranty, return it. If it's old, you're probably better off buying a new one.

Mar 02, 2011 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

HP Photosmart 2710 will not power on

Make sure the cord is not detached from the module itself. Please see support articles here and here to guide you through this issue. There are some basic tests you can perform, but you may have to find another one to confirm the source of the problem as the adapter or printer. Sometimes a local printer tech will have one you can use to check your printer, if you take the printer in to them.
Here's one source of a replacement, if it turms out to require one.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 24, 2009 | Printers & Copiers

1 Answer

I want to purchase a power supply for a HP 2710 four in one printer

visit the below weblink

Dec 31, 2008 | HP Photosmart 2710 All-In-One InkJet...

1 Answer

Screen blank and orange light flashing

I have an HP 2710 in excellent condition. I lost the power supply when moving from Texas to California.

I have since purchased another HP four in one macnine and could easly justify selling this one. My price would be low and I would be willing to ship for a few dollars. I am good at packing so it will not get damaged. Willing to sell for $35.00 and estimate $12.00 for packaging and shipping costs.

Dec 14, 2008 | HP Photosmart 2710 All-In-One InkJet...

1 Answer

Carriage Jam Error display on the LCD!

SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.Make sure that the product is turned off. 
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.

for more information please go to below link>>

Thanks for using FixYa.

Aug 23, 2008 | HP Officejet 7310 All-In-One Printer

1 Answer

HP 2710 Hit by Power Surge

Please perform the following steps.

1. Verify that the unit is switched on. Unplug the all-in-one from power and disconnect the connection port.
2. Wait 30 seconds.
3. Plug in the power only.
4. Repeat steps 2-4 two more times.
5. On the third time after plugging the unit into power, reconnect the connection port from the all-in-one to your computer.

Please do perform the following steps also:

1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.

2. Then, press and hold # and 6 while plugging in the power cord.

Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.

I hope you are located in United States of America and if so, please check the following link where in you can go ahead for the service.



Apr 26, 2008 | HP Photosmart 2710 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart 2710 All-In-One InkJet Printer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93922 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides