Question about Computers & Internet

1 Answer

Biostar gf7100p-m7s hard drive not working

I bought this biostar motherboard.The problem is very interesting.If I put a CPU,Memory,VGA and keyboard,the system boots just fine past the post and show me that no operating system found.If I pout a dvd drive it is still working fine.NOW,when I put a hard drive,IDE or SATA the system past POST but after that just hangs on a blank screen.If I try to go to the BIOS and hit the DEL key,the same thing,just hang on a blank screen.If I turn off the system and remove the HDD and turn on than everything works just fine again.So looks like the motherboard does not want to work with any hard drive.Any help will be good.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

I would flash the BIOS, sounds like something is corrupted, if that doesn't work then the blame has to be the HDD, you need to try booting with a different one, maybe a PATA too see if your problem goes away or changes. Any PATA will do, this is only a test.
http://www.biostar.com.tw/app/en-us/mb/bios.php?S_ID=348
Another SATA would even be better. Good luck.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When try to make the M/B on it just run the cpu fan and power drops instantly ?


Hi,
That means the PSU( Power Supply Unit ) is not giving enough power.
Check the wattage of your PSU, it should be 500 watts or more to power up that MoBo or the PSU your using is not working anymore.
Hope that helps you out!

Sep 13, 2011 | Biostar GF7100P-M7S Motherboard - v6.0,...

1 Answer

Biostar gf7100 mp - wont boot with ext usb drive attached


Hi, What you have to do is shut down the machine, pull the CMOS battery(CR2032) out and out and put your jumper on pins 1-2 from 2-3. Wait 30 seconds and put the battery back in. After installing the battery, put your jumper back to pins 2-3 from 1-2. This should work.

Jul 07, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

2 Answers

Sound doesn't work on biostar gf7100p-m7s


it's a common problem of gf7100p-m7s series. Its depend on ur operating system. beoz many operating systems have their own audio drivers like windows vista. If u r using windows vista don't install audio drivers from ur motherboard disk. becoz i had faced this problem some months ago. if this is not hardware relative problem, u can see ur sound will work fine.

May 28, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

1 Answer

Biostar GF 7100-M7 windows xp trouble


Do you see any text at all when booting up? If so, try pressing F8 on reboot to get to the Windows Boot menu. It's not real apparent when you are supposed to do this, so once the system gets past the initial Power on Self Test, start tapping it. Select Safe Mode and see if your display loads. Set your video settings to something safe and simple like 1024 x 768. Reboot to normal Windows and begin bumping your video settings up from there until you get them where you want them.

Mar 04, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

2 Answers

Connect cd drive to biostar gf7100p-m7s


The 34 pin connector is for your floppy drive(s) .. not for your CD drive. There is no special cable for this. 2 different interfaces alltogether.

Feb 17, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

1 Answer

On first power up, no video, no sound.


hi
*********** board dead
hope ur smps &ram also ok ......
pl z check motherboard near pc service care.......

Jan 12, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

1 Answer

Need correct hard drive for Biostar GF7100P-M7S


This isn't even a question plus its a silly post overall. SATA is a proven technology that is much faster and just as stable as UDMA.

Jan 03, 2009 | Biostar GF7100P-M7S Motherboard - v6.0,...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...