Question about Sanyo Vizon LCD-15A2 Television

1 Answer

Clicks on but screen stays black and then it shuts off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 5,568 Answers

With fair certainty, this is a problem with the main power supply. If no longer under warranty, pull the AC plug overnight to allow stored voltages to discharge before opening the set.
The power supply board is normally separate, visibly related to the AC coming in and has larger parts such as capacitors (cylindrical cases) and block-shaped parts (chokes and transformers). You can probably replace this board yourself but you need to call Sanyo/Vizon to learn whether you can get yours repaired or if you must buy a new one. If you have to buy one, don't toss the failed board since there are independent companies that can repair them for a few dollars less than the cost of a new one. It doesn't hurt to have a spare, these aren't your dad's TVs and are not lasting as long as our previous sets.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn my tv on the screen just stays black. You can hear the volume. I just replaced my bulb about a month ago. I took the bulb out again to see if it was blown and it wasnt. Does anyone know wh


send me a email slinteriors@yahoo.com and I will send you the info to retreve the error code to find out why the set is shutting down. Be sure to include the moodle number and symptoms with your email

Feb 10, 2013 | Mitsubishi WD-65C9 65" DLP HDTV

1 Answer

My laptop powers up but the screen stays black then it shuts itself down


It could be the CPU fan... Best to have it looked at by a service center...

Aug 12, 2012 | Toshiba Computers & Internet

1 Answer

M1991 screen stays black, little light is yellow


The fault is a back-light problem and the fault could be a faulty inverter board or a faulty CCFL lamp.
For service, parts and DIY info check out LCD Parts WEB site, please click on this link :-
www.lcdparts.net

Mar 15, 2010 | Dell Computers & Internet

1 Answer

Green power light on but no sound or picture.


When I press the power button it just clicks.... what. ... vs-60603 I will only stay on for a few seconds and then shuts off. ...

Mar 30, 2009 | Mitsubishi VS-45502 45" TV

1 Answer

Screen seems to be not working properly


try using a different monitor, borrow one if you have to, if the monitor works on your computer, then it simply means you need a new monitor. As far as the computer shutting down, it may be recording the bad monitor as an error in the loading process and automatically shutting down.

Mar 15, 2009 | HP TouchSmart IQ770 PC Desktop

2 Answers

Starlogic 20 inch widescreen monitor screen keeps going black


This is probably a back light problem. Take a bright flashlight and while the monitor is on, point it at the LCD and try different angles, etc. If you can see an image, it is the back light, probably the back light voltage converter unit in the lcd. It could also be the back light bulbs.

If you don't see an image with the flash light, then it could be the main logic board.

ort11

Mar 08, 2009 | Computers & Internet

1 Answer

Canon Powershot SI screen goes black after taking a photo


That sounds like a sticky lens shutter. They usually have to be replaced, as they usually will need parts. When the camera is working look inside the lens and take a picture(with flash turned off). You should see a black shutter door clicking shut in the lens. When the camera acts up, look inside the lens again. If the door is staying shut full time, that is your problem.

Nov 17, 2008 | Canon PowerShot S1 IS Digital Camera

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...