Question about 3Com OfficeConnect Wireless Router

1 Answer

I cant get to the webinterface

And when i open the device, i get red-alert led turned on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 193 Answers

Check with power adapter and do not use surge or power strip>and if u r using the device out of country (USA) u may need to use power convertor>and connect a pc hard wired and try to open router inter face>and try to change the power scores and check with manual and check with power adapter model which u r using is right one rate me solved if its helps thx

Posted on Nov 26, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Light flashes for alerts, texts


Select "Accessibility" and turn the ON switch next to "LED Flash for Alerts"

Apr 21, 2014 | Apple iPhone 4 Black Smartphone

1 Answer

Reprogram the remote,how?


1. Turn on the device that you want to set.
2. Aim the remote control at the device and press down and hold CODE SEARCH button for at least 3 seconds until the red LED lights up solid red.
3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the LED light will blink once and then remain solid red.
4. Using the number keys, enter the 3-digit code. After you have entered the 3rd digit, the red LED will turn off indicating that the code was recognized for the device.
(NOTE: If the code entered was not compatible, the red LED will flash several times. You will then need to repeat Step 2. You have 30 seconds to enter a code.)
5. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying to program powers off, then you have found the correct code. If the device does not power off, then you will need to repeat the process again from Step 2, using another 3-digit code.
The manual can be found at jumboremotecontrol.com

http://www.jumboremotecontrol.com/innovage_jumbo_remote_manual.PDF

Apr 06, 2014 | Innovage Jumbo Remote Control

1 Answer

First alert 9120b


Hi hislop_amand,

I know this is coming to you late yet I just seen your post and hope the following can still help you or others.

Kind Regards,
SD

FIRST ALERT Model: 9120 9120B

Normal Operation (AC Power)
Green LED ON; flashing Red LED once/ minute
No Audible Alarm

Normal Operation (DC Power - 9120B only)
Green LED OFF; Red LED flashes once/minute
No Audible Alarm

Mar 23, 2013 | First Alert SC9120B Smoke / CO Detector...

1 Answer

I NEED T.V CODES FOR A ADMIRAL T.V AND NEED STEPS ON HOW TO SET UP CODE FOR A INNOVAGE REMOTE


Hello
Code for Admiral TV with Innovage remote control are:
001,173

CODE INPUT SETTING:

You will need the list of codes to manually select and input the correct codes to your

specific device.

1. Turn on the device that you want to set.

2. Look for the brand name under the specific device listing provided.

3. Aim the remote control at the device and press down and hold CODE SEARCH button for

at least 3 seconds until the red LED lights up solid red.

4. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the

LED light will blink once and then remain solid red.

5. Using the number keys, enter the 1 st set of 3-digit codes from the list. You will notice

that each number that you press, the LED will blink once. After you have entered the

3rd digit, the red LED will turn off indicating that the code was recognized for the device.

(NOTE: If the code entered was not compatible, the red LED will flash several times.

You will then need to repeat Step 3. You have 30 seconds to enter a code.)

6. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying

to program powers off, then you have found the correct code. If the device does not

power off, then you will need to repeat the process again from Step 3, using another

3-digit code.
7. Make a note of the 3-digit code for future use.

CODE SEARCH SETTING:

This is an alternative method to programming your device without using the code list. The

remote control will scroll through the list of codes to identify the correct code for your

device.

1. Turn on the device that you want to set.

2. Aim the remote control at the device and press and hold down the CODE SEARCH button

for at least 3 seconds until the red LED lights up solid red.

3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the

LED light will blink once and then remain solid red.

4. Press ON/OFF button on remote slowly and repeatedly until the device you are trying to

program shuts off. (Note LED will blink once each time you press ON/OFF button)
5. Once this occurs, press ENTER button to store the code and the LED light will turn off

Mar 27, 2011 | Innovage Jumbo Remote Control

1 Answer

I bought my garmin 660 nuvi at techs for less- do i have to subscribe to traffic alert or does it come with the 660 i purchased


You have to have the traffic receiver / car charger in order for it to work (GTM-20) It looks like this:

https://buy.garmin.com/shop/shop.do?pID=403

It has a green LED for power and and an alternating yellow/red LED for traffic data detection.

Yes, you have to have a subscription to the service.


- Jim
SHARCNET-USA

Oct 11, 2009 | Garmin Nuvi 660 GPS Receiver

1 Answer

I cant access my webcam


Have you installed the right driver for this cam? Open you device manager and check whether there is any red/yellow alert in it .Feel free to visit DigitalSupportTech for getting help.

Aug 31, 2009 | Acer Aspire 5610-4648 Notebook

1 Answer

Alerts Sounds Just Stopped On My Blackberry 8220


go to profiles. and click advanced options and change it there it will have an option for everytime your phone should ring.. turn the Led light off as a reminder

Jul 02, 2009 | RIM BlackBerry Pearl Flip 8220 Cellular...

1 Answer

LRD6399SWS


LED Display gives you your display visual alerts, signal strength, and operation mode. Here is an attached link for the manual.....http://www.uniden.com/pdf/LRD6399SWSom.pdf
But to answer your question here is what the difference between the green light and the red light are:
1. X-Band Signal Indicator—A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2. K-Band Indicator— An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases as
the radar source gets closer. A distinct audio alert is also heard.
3. Ka-SuperWideband Signal Indicator— A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4. Laser Signal Indicator— A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5. SWS Signal Indicator— When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6. Power-On Indicator— A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7. LED Signal Strength Meter—Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8. City Mode Indicator—A green LED under C lights to indicate
that you selected City Mode.
9. Auto Mute Indicator— A red LED under M lights to indicate that
you selected the Auto Mute feature.

Please make sure you give me a rating and I hope this helps,
cbinny1



Oct 18, 2008 | LRD6399SWS Radar Detector

Not finding what you are looking for?
3Com OfficeConnect Wireless Router Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

micky dee

Level 3 Expert

3001 Answers

didi2005

Level 3 Expert

653 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...