Question about Canon Office Equipment & Supplies

Open Question

Canon S500 BJ-printer. I cleaned the cartidge

Canon S500 BJ-printer. Orange light is blinking 7 times and than green blinks for 3 seconds aso. Installed software at new and installed new drivers. Cleaned cartridge head already. Still orange blinking.
Now I think I have to reset the counter for the ink absorbers. But cannot find how I have to do that. Who can advice me??
Thank you very much in advance for your appreciated help.
Kr, Henk

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: THE PRINTER IS BLINKING ORANGE FIVE TIMES ORANGE AND THEN ONE TIME GREEN

buya new print head!

Posted on Apr 25, 2008

Ajkill
  • 2035 Answers

SOURCE: cannon i860

Download the manual from this link: http://www.canon.com.au/products/printers/colour_bj_printers/i865_support.aspx

Posted on May 20, 2008

  • 1 Answer

SOURCE: Hi I have reset my

Hi

I want install my Canon ip 1200 it now prints


Hafiz
Bangladesh.

Posted on Sep 21, 2008

  • 7 Answers

SOURCE: printer light is blinking in orange & green

bassically your printer has come to the end of its life, you can either buy a new printer or contact the service center...

Posted on Jul 13, 2009

  • 56 Answers

SOURCE: tank absorber full and lights blinking

The POWER Lamp Flashes Orange Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, contact a Canon service representative.

Note
Canon recommends that you call for service as soon as this error occurs. Once the waste ink tank becomes completely full, printing will no longer be possible.

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green light flashes, will not print. Checked all


Hi can gave you the truble codes
  • Light Orange - 2 beeps: Remove any paper jammed
  • Light Orange - 3 beeps: Remove any paper jammed
  • Light Orange - 4 beeps: Add Ink
  • Light Orange - 5 beeps: Re-install cartridge or replace it
  • Light Orange - 6 beeps: Re-install cartridge or replace it
  • Light Orange - 7 beeps: Re-install cartridge or replace it
  • Light Orange - 8 beeps: Waste is almost full
  • Flash 1 x Orange - 10 beeps (error code 6100): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 2 x Orange - 10 beeps (error code 6300): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 3 x Orange - 10 beeps (error code 6800): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 4 x Orange - 10 beeps (error code 5100): Make sure nothing is blocking the cartridge movement, if not requires service.
  • Flash 5 x Orange - 10 beeps (error code 5400): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 6 x Orange - 10 beeps (error code 5B00): Waste full (make a reset)
  • Flash 7 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 8 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 9 x Orange - 10 beeps (error code 5600): Replace the BJ Cartridge(Printhead) or reinstall it
  • Feb 01, 2010 | Canon BJC 4400 InkJet Printer

    1 Answer

    Canon ip1800 green light blinks once and orange light blinks three times


    try to clean the circuit of the cartidge with dry tissue or cotton cloth with little alcohol if blinking again replace new one black or color catridge

    Jan 27, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

    1 Answer

    Canon S300 printer. 7 orange blinks, 1 green. I


    According to the manual found here:

    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=330&modelid=6609

    7 orange lights represents a bad print head, and the printer will need serviced or replacement. Since printers are so cheap lately, I would just go shopping. Hope this helps! Thanks!

    Oct 21, 2009 | Canon BJC S300 InkJet Printer

    1 Answer

    Printer not working. The light flashes red six times.


    Error Condition Indicator Beeps Error
    Code Possible Solution Paper Feed / Delivery Orange 2 Remove any paper jammed Paper Jam Orange 3 Remove any paper jammed Ink Out Orange 4 Add Ink BJ Cartridge Misinstalled Orange 5 Re-install cartridge or replace it NO BJ Cartridge Orange 6 Re-install cartridge or replace it BJ Cartridge Error Orange 7 Re-install cartridge or replace it Waste Full warning Orange 8 Waste is almost full , needs service very soon Service Errors Blinks Beeps Error
    Code
    Possible Solution ROM Error 1 x Orange 10 6100 Try unplugging Printer RAM Error 2 x Orange 10 6300 Try unplugging Printer EEPROM 3 x Orange 10 6800 Try unplugging Printer Home Position 4 x Orange 10 5100 Temperature Sensor 5 x Orange 10 5400 Try unplugging Printer Waste Full 6 x Orange 10 5B00 Needs Service Cartridge OverHeat 7 x Orange 10 5200 Replace the BJ Cartridge(Printhead) Cartridge OverHeat 8 x Orange 10 5200 Replace the BJ Cartridge(Printhead) Cartridge Displaced 9 x Orange 10 5200 Replace the BJ Cartridge(Printhead) or reinstall Cartridge Displaced 10 x Orange 10 5200 Replace the BJ Cartridge(Printhead) or reinstall Cartridge Displaced 11 x Orange 10 5200 Replace the BJ Cartridge(Printhead) or reinstall Other Hardware error 12 x Orange 10 6500 Other Hardware error None None 5910 Needs Service Other Hardware error None None 5C00 Needs Service

    Oct 01, 2009 | Canon S400 InkJet Printer

    1 Answer

    Canon bjc-3000 will not print


    You said that the light blinks 7 times. It means that the BJ cartridge (printhead) is defective

    Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are clean. Make sure the orange protective cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge.

    I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
    If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

    Apr 26, 2009 | Universal Office Ink Tank Cartridge for...

    1 Answer

    Canon i950 won't print


    try this Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
    1. Start with printer OFF
    2. Hold down RESUME and then hold down POWER
    3. Release RESUME
    4. press RESUME twice, then release POWER
    5. let green light blink until printhead has finished moving.
    6. Select functions below with RESUME, execute with POWER

    0 presses - green light - Test Print (exit service for i960)
    1 press - orange light - EEPROM info print
    2 presses - green light - EEPROM initialise
    3 presses - orange light - reset waste ink counter.

    one by one

    Jan 25, 2009 | Canon i9900 InkJet Photo Printer

    1 Answer

    Printer is not responding


    This is the error light page from the S520. Not sure about this, but probably the same on the S530. 8 Blinks means replace the ink absorber and reset the counter. I think the ink absorber can be gotten at from the bottom, BUT NOT SURE. Try this at your own risk!

    7.1 Service Mode Operation
    1) With the printer turned off, hold down the RESUME button and press the POWER
    button (the green indicator lights and the desired service function can be selected).
    2) While holding down the POWER button, let go of the RESUME button before pressing
    the RESUME button again twice in succession. Then let go of both RESUME and
    POWER buttons.
    (At each press of the RESUME button, the indicator toggles between orange and
    green.)
    3) During printer initialization, the green indicator blinks. When the green indicator
    stops blinking and remains on, press the RESUME button the specified number of
    times to execute the desired service function, as listed below.
    (At each press of the RESUME button, the indicator toggles between orange and
    green.)
    Press Indicator Function
    0 times Green Power off (Even if there is no print head mounted, the
    carriage will return to the home position and lock.)
    1 time Orange Service/factory test printout (Including ink sensor check)
    2 times Green EEPROM information printout
    3 times Orange EEPROM initialization
    4 times Green Clears the waste-ink counter (S750/S520)
    Waste-ink counter settings (S900/820) (See page 2-34)
    5 times Orange Destination (model) setting
    After reaching this service function, press the RESUME
    button the number of times specified below to set the
    destination.
    Setting
    0 times BJ F900 BJ F890
    1 times S900 S820 BJ F700 BJ F500
    2 times BJ F890PD S750 S520
    3 times S820D
    Note: pressing more than 3 times has no effect.
    6 times Returns to the function select stage (S750/520)
    6~9 times Not used for servicing (S900/820)
    More than Green Returns to the function select stage (S900/820)
    10 times
    4) After selecting a service function, press the POWER button. The green indicator
    lights and the service function will be executed. (After each function is executed, the
    printer returns to the service function select stage.)

    READ THIS CAREFULLY !
    Larry

    Nov 30, 2008 | Canon S 530D InkJet Printer

    1 Answer

    Orange light blinks 7 times then green light once and repeats,


    It indicate that your print head may defective probably cause by electrical connection, u can try to unplug the print head and clean the electrical contact part with dry paper and install it back. Make sure the contact part is fix into the holder completely.

    YBC (/\)

    Oct 07, 2008 | Canon i950 InkJet Photo Printer

    1 Answer

    THE PRINTER IS BLINKING ORANGE FIVE TIMES ORANGE AND THEN ONE TIME GREEN


    u cradige has been short so u have do this inestert new cardige & try to pritnt your problem will solve

    Jul 12, 2008 | Canon BubbleJet i560 InkJet Printer

    Not finding what you are looking for?
    Office Equipment & Supplies Logo

    Related Topics:

    67 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    kakima

    Level 3 Expert

    102366 Answers

    old marine
    old marine

    Level 3 Expert

    1921 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...