Question about Dell PowerEdge 1400 ( pe1400/210 ) Server

1 Answer

No video ( Problem )

My DP 1400 does not show video, i checked the procesors and are OK... I hear a constat little sound each second and my poscard analyser shows a POST 09 and 04 Error..  Help Please, Thx

Posted by on

1 Answer

Re: No video ( Problem )

You should check your ram it can be damaged or not inserted properly in slot.

Posted on Nov 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My lenovo e430 will no longer connect to an external monitor (projector)

Video is not coming in my Sony Bravia HDTV while connected with HDMI cable from Lenovo E430. I could hear the sound. Is there any solution for this?

Feb 20, 2013 | Lenovo ThinkPad Edge E430 3254ADU 14" LED...

1 Answer

Installed new memory it started fine then crashed no video now no beeps upon start up

Such errors of NO VIDEO mean:
- Memory not inserted correctly: pls remove and insert memory again
- Graphics cards possibly moved a bit while you were trying to install the memory: Remove graphics card and insert again.

Another reason could be: Graphics card is brurnt! Perhaps due to touching the chipset with hands full of static electric.
If above 2 suggestions do not work, put your graphics card in another PC and check if it works, if not -bad luck- replace it.

Aug 04, 2011 | Dell PowerEdge 1400...

2 Answers

I am trying to install a pcie-x1 video card on a ibm eserver x206m i salvaged from work. I am running windows 7 64bit . I have tried to turn off on board graphics so that it takes the video card i just...

I know this is really old, but I had the same problem on my 206m 8584 with a pci-e x1 video card. I had to upgrade bios first, but nothing seemed to change, bios only showed onboard video as option and windows perfectly recognized the exta card. I went to windows video settings, it showed both video, onboard as main and active and extra as inactive, changed the second video to main and active and switched the plug to finally see my enhanced video. Only problem is that bios screen won't show up on pci-e card, so I start seeing something only after one minute :) Hopes this saves someone else some time.

Nov 03, 2010 | IBM eServer xSeries x206m

1 Answer

Concise Question, Poweredge 1800 powerup failure

It is definitely the PSU that's not working properly,because defective motherboard should still receive the 12V. you can use a desktop standard power supply to check if the server runs fine, even a cheap one is ok for a test run. they sell also cheap (about 15-20$) PSU tester, definitely worth when working with servers and WS.
the Power supply fan might have a dedicated rail coming from the thermal sensor(thermistor.)this is why it can run even with bad 12V rail.

Feb 11, 2009 | Dell PowerEdge 1800 Server

2 Answers


What type of chipsetup your motherboard has and up to what bus speed its supports, what processor speed now u use and what model is your server, most server main boards supports two processors please lets us know what model server u got

Jun 27, 2008 | Gateway 920 Series (gtwy920) Server

4 Answers

Power edge 2600 sever shows problem

i replaced one of the hard drives in my poweredge. how do i get it to copy from the good hard drive?

Jan 28, 2008 | Dell PowerEdge 2600 Server

1 Answer

Booting problem

Hi Yunisa,
I need a little more info on this issue. Do you hear the power supply fan operating when you switch the server on? Did the server still startup even though the monitor is not displaying? Did this problem just occur or where there other signs of a problem coming? This may sound a little foolish to you, but check to make sure that the server is plugged into power and that the monitor is connected properly. There should at least be a message on the monitor indicating there is no signal coming to the monitor. The first thought that comes to mind if all is connected would be that the power supply has failed. Please check this out and get back to me with info.

Nov 05, 2007 | Dell PowerEdge 1800 Server

Not finding what you are looking for?
Computer Servers Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Servers Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Shawn DuRee

Level 3 Expert

353 Answers

Edd nugent

Level 1 Expert

37 Answers

Are you a Dell Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides