Question about Sonic Impact Technologies IF22 Docking Station for Apple iPod (648027050846)

1 Answer

Can any ac adapter be used with sonic impact IF2? Or does it have to be the charger made just for that device?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 109 Answers

Just make sure that the VOLTAGE and MILIAMP input rating match what it says on the Sonic unit itself, and that the connector is the correct size. More importantly, make sure that the polarity of the plug is correct. Some are inner connector = positive and outer connector = negative or vice-versa. That also should be on a sticker on the Sonic unit or embossed into the case near the connector. DC voltage is UNFORGIVING when the polarity is reversed. The unit itself doesn't care WHAT is supplying the current to run it AS LONG AS ALL THE ABOVE FACTORS ARE MET. If this has been helpful, please rate it accordingly. Thanks and good luck. FYI: check eBay for universal power supplies that include different tips. One should fit your unit. $15-$30

Posted on Jul 15, 2009

  • Jerry Owen
    Jerry Owen Oct 25, 2010

    I have a charger A/C adaptor from an iF-2. Do you still need one?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a i-F3 dual-alarm clock radio for ipod and need a power cord


Look on ebay or ask via Want it Now post they should be able to have
a suitable one I would think

Aug 24, 2012 | Sonic Impact Technologies 9v Ac / Dc Power...

1 Answer

I have a sonic impact technologies sonic impact video 55 and it want come on and it want take a charge what wrong with it


The battery is rechargable for about 400x. If you leave it on the charger too long or never let the battery run down it will shorten its life span. Sonic Impact no longer sells the replacement battery unit through their website and I have been looking for replacements myself. the problem is this: the battery unit is integrated with the battery cover and can not be separated. So you need the actual Sonic Impact battery, and they have not responded to any emails, requests for customer support or phone calls. Good luck.

Nov 11, 2009 | Sonic Impact Technologies Sonic Impact...

2 Answers

Sonic Impact iF2 Not charging


Hey how do I find a replacement battery for the Sonic Impact I F2?

May 07, 2009 | Sonic Impact Technologies IF22 Docking...

1 Answer

How do I get a manual on a Sonic Impact Technologies iF2


I kept "attacking the internet" until I found their home page and down loaded the manual. Bill Geist

Mar 02, 2009 | Audio Players & Recorders

1 Answer

Sonic impact i-P23 quit working with AC adapter & with batteries


Same problem. Speakers blew out and you can't get a hold of ANYONE at the company. You might want to try contacting the co-founder and principal Richard Bracke at BigRich@si-technologies.com (not sure if it's his correct email but I'm going to try it) or writing a letter to him at: Address: 255 State St., San Diego, CA 92101-1315

Jan 19, 2009 | Sonic Impact Technologies i-P23 Portable...

2 Answers

Docking connector for sonic impact if2


Had the same problem for a while, not been able to find any useful info anywhere.

Got a little bored today and decided to have a go myself.

First remove the battery.

The exterior zipped cover is glued to the plastic electronics compartment, careful prising (the cover is fairly flexible) can loosen the glue enabling you to remove the compartment.

Unscrew the plastic cover under this you will see the the pcb that the dock connector is attached to, along with lots of glue holding the wires for the speakers.

Unscrew the pcb and remove all the pcb connectors (all glued secure), then you will have access to the side you need to solder.

Now all you need is a hawk-eyed soldering genius as the tabs on the connector are extremely fine and closely spaced.

After testing I'd also recommend gluing the dock connector to the pcb for added future security.

Hope this helps.

Mar 28, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Sonic Impact Technologies IF22 Docking Station for Apple iPod (648027050846) Logo

883 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sonic Impact Technologies Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

jscuin6

Level 2 Expert

132 Answers

Tom Chichester

Level 3 Expert

34095 Answers

Are you a Sonic Impact Technologies Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...