Question about Uniden Office Equipment & Supplies

1 Answer

Igot a used Uniden bc100xlt scanner and no manual and cannot rece

I got a used Uniden BC100xlt scanner and no manul and cannot receive anything and hoped you can help.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to uniden's website for literature or call small electronics shops for repairs...Most wont work on those units as they are too old. I have a uniden BC100XLT from 1988. I had to buy another one off ebay for parts. Also look for info on the BC200XLT as it was an almost identical model. Finally the batteries corrode and certain transistor pop in these early models, check the battery first. open it up and make sure the wires are still connected to battery.

Posted on May 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to program uniden bc450a scanner

it is difficult to find the user manual it may be at this link
I am not game / sure of the web site safety to sign up for an account to find out if the manual really is available

Mar 09, 2016 | Uniden Untested Bearcat BC450A Scanning...

1 Answer

How do I Reset BCD436HP?

I can't find anything about a reset for the scanner.
Perhaps you refer to the manual, for setting back to factory settings?
Or how to program or put in a new program, using a micro SD card.

May 31, 2014 | Uniden BC346XT Handheld Scanner

1 Answer

Mod BC100xlt --scannes,no sound ,tried squlch&volume no luck JERRY

Hello Jerry,

If you have an external speaker or headphones, plug it into the headphone Jack. If you get audio then your problem may be a bad speaker or a problem with the headphone jack. If you still don't get any audio then threre may be a problem with the Volume pot or Audio chip, in which case the scanner will require sevicing by a qualified technician.

Jul 21, 2011 | Uniden BC60XLT Handheld Scanner

1 Answer

I have a uniden bear cat scanner

That scanner dates back to 1987, so chances are that the battery pack is well beyond charging. I found a new battery pack here:
but it will set you back more than $90. Another option is to open/dismantle the battery back and use a battery insert. You can purchase one for $12.95 here:
The original battery is rated at 7.2VDC, but the charging circuit is set up for 12VDC at 500mA, so stay with your 12 volt charger.

Bill B.
Listening in since the 60's

Jul 26, 2010 | Uniden BC60XLT Handheld Scanner

1 Answer

I bought A scanner in victorville and the guy who sold it to me said that it work the thing is that I can not hear anything when police or other people are talking What do I have to do to fix my problem It...

Make sure you have selected the correct frequency range and radio band.

The bands are usually Police/Fire/Air Traffic/Marine/and Short Wave. Depending on your geographic location, you may or may not pick up transmissions.

Also try using the auto-scan feature to seacrh for chat, and adjust the squelch setting so you don''t choke out too much squawk chatter.

Jan 13, 2010 | Office Equipment & Supplies

1 Answer

Uniden bearcat bc100xlt Can you use regular batteries with this radio ?

If you open the 7.2 volt battery pack you'll find 6 AA NiCad batteries. If you're even a little bit handy you can "rebuild" the pack with 6 new NiCad or NiMH batteries -- a save a big chunk of the $80 that suppliers want for a new pack.

Jan 06, 2010 | Uniden Radio Communications

8 Answers

Uniden Bearcat BC60XLT 10 Channel 10 Band Radio Scanner with L/O on every channel #

Turn off power, hold down the 2, 9 & L/O buttons while turning the power back on.

Aug 09, 2008 | Uniden BC60XLT Handheld Scanner

2 Answers

Uniden bearcat bc100xlt handheld scanner

This usally means a bad battery, you can fix it but it may cost more than it's worth

Jun 02, 2008 | Radio Communications

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

855 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Office Equipment & Supplies Experts

Lawrence Oravetz

Level 3 Expert

9742 Answers

Brad Brown

Level 3 Expert

15941 Answers


Level 3 Expert

3957 Answers

Are you an Uniden Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides