Question about HP Compaq EVO D510 Intel Desktop PC - Intel Pentium 4 2.4GHz, 512 DDR, 40GB HDD, CD-ROM, 10/100 LAN,

1 Answer

My EVO 510 has been operating fine until last night when I entered my password resume from screen saver, the machine did not return to the desktop and just hung with a blank screen. I powered off teh machine and tried rebooting normally, but after entering my Novell password the desktop does not appear. I was able to boot in SAFE mode which is where I am operating from now. I can not print to my local printer because it is not recognized in SAFE mode. All apps, including Outlook, apparently work in SAFE mode.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Click Start>Run and type msconfig. Select the startup tab and deselect everything. Reboot your computer and attempt to log into Windows. If you are successful you will need to access msconfig and re-enable programs systematically until you find the culpret.

Best Regards.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove password


If you are using WINXP, right click on the open desktop. From the pull-down menu, select PROPERTIES. From the PROPERTIES window, select the SCREEN SAVER tab. Uncheck the "On resume, password protect" check box. If you are using WIN 7, go to CONTROL PANEL, then APPEARANCE and PERSONALIZATION, then PERSONALIZATION. At the bottom, select SCREEN SAVER. In the SCREEN SAVER SETTINGS window, uncheck the "On resume, password protect" check box. This will allow you to wake up from screen saver without having to use password.

Sep 02, 2014 | Gateway Computers & Internet

1 Answer

On startup, an error is displayed that 510-splash screen corrupt" i can not even start windows or boot from cd until screen is visible. i have want to restore / fix the problem with or without cd. i...


You can fix this by popping in your windows disc and booting.You could repair the whole installation which would take 45 mins, or use the recovery console to fix the files within a few mins.



Repairing through recovery console:

> Boot form cd
> Enter recovery console
> Enter your password for windows
> Type and enter copy F:\i386\ntdetect.com c:\ assuming f is your cd drive letter
> Type and enter copy F:\i386\ntldr c:\
> Type and enter fixmbr, yes to agree
> Type and agree to fixboot
> Type exit to get out of the console and exit the installation and reboot. The above should fix files needed to boot.

Sep 28, 2011 | Compaq Evo D510 PC Desktop

1 Answer

Lap top shows a screen saying "Computer is locked" just clicking on the box, makes it go to the next screen. just a hasle doing this every time.


In order to remove the lock screen after resuming from screen saver, sleep, standby, and hibernate, please follow these steps.

Windows Vista/7
1. Right click on an empty space on the desktop and select "Personalize"

2. On the far right of the Personalization window is the option for Screen Saver. Click "Screen Saver".

3. Unselect "On resume, display logon screen".

4. Click "Change Power Settings".

5. Click "Require a password on wakeup" on the left hand pane.

6. Select "Don't require a password" and select Save changes.

Windows XP
1. Right click on an empty space on the desktop and select "Properties"

2. Select the Screen Saver tab.

3. Unselect "On resume, display Welcome screen" or "On resume, password protect".

4. Select "Power".

5. Select the "Advanced" tab.

6. Uncheck "Prompt for password when computer resumes from standby". Click Apply, then OK, and then OK again.


Good luck, please post back if you have any difficulties, and thanks for using FixYa.

Apr 11, 2011 | Computers & Internet

1 Answer

After start Vista locks itself.


You need to go into your Webshots screen saver and deactivate it and re-activate it.
1) Right click on the desktop -> Personalize -> Screen Saver.
2) If you are using Vista, uncheck the box which says 'On resume, display logon screen' or else in Windows XP this would be 'On resume, password protect'.

password-protect-in-screen-saver.jpg 3) Save and close. Next time you move out of your PC it will not lock itself after in the screen saver settings.
Rgds

Dec 04, 2010 | Microsoft Windows Vista Home Premium with...

1 Answer

If I leave my computer unattended for maybe 15 min. this monitor turns itself off. Is there a way to fix that? Thanks, brumeister



Screen savers can help protect your monitor from wear by showing a constantly changing display when your computer is not being used. Screen savers can be simple, like the Blank screen saver that turns off your monitor to save energy. To change your screen saver 1. Right-click your desktop, and then click Properties.
2. In the Display Properties dialog box, click the Screen Saver tab.
3. Click the Screen saver drop-down box, and then click a screen saver.
4. Click the Preview button to see how the screen saver will appear on your monitor.
5. Move your mouse or press a key to return to the Display Properties dialog box. To try a different screen saver, return to step 3. 6. Click the Settings button to change the standard behavior of the screen saver you selected. (Each screen saver has its own settings dialog box.) Then, click OK.
7. In the Wait box, type the number of minutes the computer should wait to start the screen saver after you last touched the keyboard or mouse.
8. If you are the only person who uses your computer and you are not concerned about security, clear the On resume, display Welcome screen check box. Otherwise, leave this check box selected. Note: If your computer is joined to an Active Directory, the Fast Users Switching feature will be disabled. This is a common change made to computers used for business, and it happens automatically when a computer joins an Active Directory domain. However, disabling the Fast User Switching feature is not the default setting. Almost all computers in home environments will have Fast User Switching enabled. When Fast User Switching is enabled, you'll see the On resume, display Welcome screen check box. If you're part of a domain, you'll see the On resume, password protect check box.
9. Click OK.

Jan 20, 2010 | Element Electronics FLX-3211B 32 in. LCD...

1 Answer

Emachines e4218 has locked and comes enter pass word to unlock system


turn off the screen saver or change the settings in screen saver, power settings by uncheck the need password to resume

Oct 10, 2009 | E-Machines eMachines Desktop PC

1 Answer

Periodically the page on screen goes blank


Windows inactivity for screen saver is set. If you want it to deactivate.

On Windows desktop screen, right click mouse a pop up box will show. Select "properties" or "personalize", go to screen saver. Uncheck the box with " on resume, display log on screen". And on screen saver box select NONE this will unhighlighted the inactivity time and the logon screen. Hit apply and then ok button.

This will deactivate the screen saver.

Mar 31, 2009 | Acer Aspire 5500 5570-2609 Laptop

1 Answer

Screen saver keeps poping up if i stop typing and i have 2 keep unlocking screen everytime i get back on computer and also slide show comes up when its sitting 4 awhile


xp:
1. right click on unused space on your desktop and click properties to bring the display properties, (you can also go into start>control panel and double click on display)
2.then go to the screen saver tab and click on it
3. modify the time for screen saver to come up and uncheck the box that says "on resume password protect" so you're not asked for a password everytime your screen saver is on and you're returning to work on your computer.

vista:

it's a bit different than xp but similiar in some sense..
when you right click on the desktop go to "Personalize" to bring the display properties and then go to screen saver and modify the wait time and password protected settings.

hope that helps!!

post back if you have any problems

Dec 13, 2008 | Gateway Computers & Internet

Not finding what you are looking for?
HP Compaq EVO D510 Intel Desktop PC - Intel Pentium 4 2.4GHz, 512 DDR, 40GB HDD, CD-ROM, 10/100 LAN,  Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...