At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try unplugging all the connectors between the TV circuit boards and then plug them back in (be gentle they are fragile), this can often be caused by a poor connection.
I would consider getting a quote for repair. Sometimes it is something simple, other times it is more expensive to fix rather than buy a new one. I say get a quote, because in the long run a qualified repair shop can figure out what what needs to be replaced, rather than spending money on parts and hoping you found the broken component. If you can get your hands on a model that has a cracked screen, for example, it may be worth it to try to swap parts.
Problem with plasma screens is that they do have a limited life, they also do not like to travel. You have to keep them upright because the glass panel is so heavy. Did you lie it flat for transportation? Is the black area in the middle bottom or in the corner? If it is in the corner, and the mounting point has a problem, it could cause this, but hard to say without seeing it. Does the black area retreat when it is off and cools down? I doubt if it is the system board, sadly if it is the display panel, it would not be worth fixing.
Let me know if you have more details... Good luck.
everything is fixable when this happened to us the cost to repair was close to the cost of buying new. we paid 598 for our tv and was 475 to fix ,,,,,we opted to buy new and get an extended warranty on the tv for 5 yrs ended up being the more practical solution
The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.
Its Sounds like Convergence Circuit,If you take the Back off and look on the right side you should see a Board with Big black Ics Mounted beside a Large Heatsink,Mark the wires where they go and Make sure the POWER is Off Pull the Board out and Inspect the Connections from the ICS,you find Circle Breaks,They need to Be resoldered and That should fix the Set....
×