Question about Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

1 Answer

KF-50WE610 shuts down,light flashes 6 times - Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,191 Answers

Hi,
This problem is mainly seen if there is some serious error in the television circuit or the power supply. You can try and reset the television by the following method:

1) Turn off the TV and wait for 5-10 mins to let the lamp cool.
2) Unplug the TV power cord from the power outlet.
3) Leave the TV without power for 1 minute.
4) Plug the TV power cord into the electrical outlet. If you are using any power surge protector / poerstrip, remove it and connect the TV power cord directly into the wall socket. This will also help to find if the real problem is due to the power surge protector? power strip.
5) Turn on the TV.

We hope that this solves your problem. If the problem persists, refer the problem to a trained service technician/service center.

Thanks.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Sony 50we610 won't turn on


lame covetswitch rusted

Jan 09, 2013 | Sony KF-50WE610

1 Answer

Sony LCD Model KF-60WE610 lamp was replaced and then it shortly after stopped turning on. Blinks Green 6 times then Red 6 times Please help!


For Sony Model KF-60WE610, KF-50WE610, and KF-42WE610, the Diagnostic Code of power light indicator flashing 6 times green, then flashing 6 times red (6 red etc), means you need to replace part number A-1302-272A G1 BOARD, COMPLETE. See Sony Service Manual, 4. Chasis-1 at part Ref no. 103. The Power Board sits vertically in two slots on the left side of the electronics board. 4 wire connectors to remove when replacing. This component fits all 3 KF models listed above.

Jun 22, 2011 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

50 inch kf-50we610 SONY TV blinking light


Thats usually caused by a regulator having failed.or could also be a wire cable not connected correctly. Troubleshooting the power supply will verify if the +17V line is missing

Dec 16, 2009 | Televison & Video

1 Answer

Sony KF-60WE610, green light flashes few times and return to red, what could be the problem TV only five years old


Your lamp (back lighting) is burnt out and need replacement. The instructions are in your manual

Nov 08, 2009 | Sony XL-2100U Projector Lamp for...

1 Answer

SONY GRAND WEGA KF-50WE610 can't turn on TV screen.


Ths 5 blinks usually indicate an AKB problem. There is a break in the video path. I'll look up your specific model and post the results here. Please update this if you wish to attempt the repair yourself.

Thanks,
Dan

Mar 19, 2009 | Sony Grand WEGA KDF-55WF655 36" Rear...

2 Answers

Sony KF-50WE610 flahing red light (6 blinks)


Jeff, did you look at the Sony web site? They had a problem with 9 different TV models that were from 2003 and 2004, KF-42WE610, KF-50WE610, KF-60WE610 and 6 other models.
This is what it states: It haas come to our attention that a limited number of Grand WEGA rear projection TV's may exhibit warping to the lamp access door. In rare cases, some additional components may also become damaged as a result. and so on........
You probably have some components melted on the inside around the lamp. I have a 42 inch and I just replaced the lamp at Christmas and the door was melted shut. This is the second lamp that I have replaced, the door was starting to melt the first time. They never sent me anything about this problem, and as of today I am still trying to work something out with them. The repair shop who has it told me that it can't be repaired. The parts that are melted are not in stock and they don't make them anymore. They are supposed to get back with me and make me some kind of offer.
They will only fix this problem through March 31, 2009.


Nov 17, 2008 | Sony XL-2100U Projector Lamp for...

2 Answers

Replace Lamp Flashing


Clean the cooling fans, specifically the lamp cooling fan located inside the rear cover, above the optical blocker. This is easily blocked with dust and causes overheating of lamps/shortened life.

Nov 07, 2008 | Sony XL-2100U Projector Lamp for...

Not finding what you are looking for?
Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...