Question about Canon MultiPASS MP730 All-In-One InkJet Printer

1 Answer

I disconnected the printer when I moved the computer, then reconnected it and it is prompting me to enter the disk with the software to install. I cannot find the disk. Can I install without the disk, or can I get a new disk?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Whenever we are buying any new printer, the printer driver cd will be given by the vendor to install the printer in the Laptop or Desltop.

In this incident, the printer software might have been removed fully without knowing this issue.

The best things is either approach the Local Printer dealer to get the Printer Driver cd and install the same in the machine.

Or it can be donwloaded from the Net, but it will consume more time.

Best solution is approach the local printer engineer who will be having the Driver CD with him to install the same in the machine.

One more request is make the printer, desktop or laptop should be in some annual maintenance contact with local authorized vendor. In this case, if it is under Annual Maintenance Contract, the Vendor should have installed the printer within a short span of time.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have bought new Hewlett Packard computer Model #200-5220. Tried to install a Lexmark X2330 printer. Went into control panel ''install a printer' - highlighted Lexmark, but in the next column the model...


Disconnect the printer from the computer. Insert the driver disk that came with the printer into the CD/DVD player of the computer. Follow the prompts and install the software for the Lexmark. When it is finished installing, connect the usb cable to the computer and try printing a test document.

If you do not have the disk that came with the Lexmark, go to the manufacturers website at www.lexmark.com and click on support. Then find the download software/driver option and enter your model of printer. Then follow the prompts to download the file to your computer and install it. when it is finished installing, connect the printers usb cord to the computer and try printing a test document.

Some drivers do not come with your operating system and need to be installed before your printer is connected. Once the drivers are loaded the pc will automatically recognize the printer once connected.

Mar 28, 2011 | Lexmark X2330 Printer

6 Answers

I need instructions on how to install my lexmark office all in one with fax x4270. i used the cdrom and I have a usb port


install the cd first. and do not connect the usb wire first and follow the instructions.and connect the usb wire when it prompts u to connect the usb wire.

Oct 07, 2008 | Lexmark Office Equipment & Supplies

1 Answer

I want to install my printer hp pcs 1315 all in one but unable and i dont have the cd drive to do it;


Go to Hp's website and download the driver and software for free. www.hp.com. Find "customer support" and then click on "download drivers and/or software". Enter your make and mode of your printer and follow the prompts to download the software and drivers to your computer. Then follow the prompts to install it. Disconnect your printer from the pc until the installation is complete. Connect the printer when the software prompts you to do so.

Mar 08, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

I lost my install disc for my HP C6280printer. How can I install it


You lost your disc? No problem!

Just go to HP's website and download the drivers and software, then install them on your computer and you will be ready to go!

Their website is located at http://www.hp.com. Look for downloads and then enter your make and model of printer to locate the software. Then just follow the prompts to download and install it. Disconnect your printer from your computer before installing the software and reconnect it after the install is complete or when you are told to do so during the installation procedure.

Hope this helps?

Nov 06, 2010 | HP C6280 All-in-One Printer

1 Answer

My hp laserjet 1200 series keeps running test pages, how do I reset it?


Follow these steps:

1

Reset your printer if you are having communication problems with the computer. To do so, press the "Power" button to turn off the printer. Wait a few seconds and then power it back on.

2

Power off the printer again if you are still running into problems and disconnect the power cable from the AC power. Wait a few seconds and reconnect the power cable. Power on the printer. This simple procedure resets the printer back to the default factory settings. Move to the next step if the reset does not work.

3

Disconnect the USB cable from the printer. Insert the printer software installation CD into the CD-ROM drive on your computer and wait for it to automatically launch. Click the Windows "Start" button if it does not launch and click "My Computer. Right-click the CD-ROM drive with the disk and click "Autoplay to run the CD.

4

Select "Setup" on the CD and select "Remove HP printer. The printer software and drivers are removed from your computer.

5

Reconnect the USB cable to the printer. The installation disc automatically recognizes it and begins reinstalling the software and drivers.

6

Print a test sheet to verify that the printer is now working. You can print a test sheet using a word processing application (e.g. Microsoft Word) or using the Internet.

Oct 26, 2010 | Office Equipment & Supplies

1 Answer

The ink icon light is blinking


  1. Reset your printer if you are having communication problems with the computer. To do so, press the "Power" button to turn off the printer. Wait a few seconds and then power it back on.
  2. Power off the printer again if you are still running into problems and disconnect the power cable from the AC power. Wait a few seconds and reconnect the power cable. Power on the printer. This simple procedure resets the printer back to the default factory settings. Move to the next step if the reset does not work.
  3. Disconnect the USB cable from the printer. Insert the printer software installation CD into the CD-ROM drive on your computer and wait for it to automatically launch. Click the Windows "Start" button if it does not launch and click "My Computer. Right-click the CD-ROM drive with the disk and click "Autoplay to run the CD.
  4. Select "Setup" on the CD and select "Remove HP DeskJet 932c. The printer software and drivers are removed from your computer.
  5. Reconnect the USB cable to the printer. The installation disc automatically recognizes it and begins reinstalling the software and drivers.
  6. Print a test sheet to verify that the printer is now working. You can print a test sheet using a word processing application (e.g. Microsoft Word) or using the Internet.

May 13, 2010 | HP DeskJet 932c InkJet Printer

1 Answer

When installing my epson printer the following message appears 'File Epson E_DMA130.DLL is needed'.


Thank you for visiting Fixya.

One of the software files may be corrupt. Follow these steps to correct the problem:
  1. Disconnect the USB cable from your printer.

  2. Click Start and select My Computer.
  3. Double-click the icon that represents your hard drive (usually C:).
  4. Double-click Program Files.
  5. Double-click EPSON.
  6. Double-click PrinterDriverTemp.
  7. Delete the PMATEDX folder.
  8. (Confirm delete as needed)
  9. Reinstall the software using either the CD or the file you downloaded.

    If you reinstall using the CD and it still doesn’t work, repeat this procedure from step 1 but try reinstalling with the downloaded file instead.
Reconnect the USB cable when prompted to do so.
If the steps above don’t solve the problem, follow these steps:

  1. If you have any USB devices other than your printer connected to your computer, disconnect them.
  2. Click Start and select Control Panel.
  3. Double-click Printers and Faxes.
  4. Double-click Add Printer.
  5. Click Next.
  6. Select Local printer attached to this computer and make sure the Automatically detect and install my Plug and Play printer box is not checked. Then click Next.
  7. Select USB001 (Virtual printer port for USB) from the Use the following port list. Then click Next.
  8. When you see the window containing the list of manufacturers, click Have Disk.
  9. Click Browse, navigate to the C:\Program Files\EPSON\PrinterDriverTemp\PMATEDX folder, and then double-click E_DF19TA.INF.
  10. Click OK.
  11. Click Next or Finish in each remaining window to complete the installation.

If you see a window asking if you want to replace the existing driver, select, 'Replace Existing Driver' before you click next.

Reconnect your other USB devices if necessary.

Jan 28, 2010 | Epson Office Equipment & Supplies

1 Answer

Computer wont communicate with printer


If you have installed your printer on your PC using an original Lexmark Driver CD that came with your product and you are experiencing problems when printing, you may have installed the Windows XP driver.

Follow these steps to resolve:
Disconnect your USB cable from your printer.
Uninstall all Lexmark printer drivers on your PC.
Download the correct Vista driver for your model.
Install the driver on your PC.
Important Notice -
Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.
go to Lexmark website using this link: http://support.lexmark.com/perl/support/support.cgi enter your product number (X4270) and you will find your driver for Vista. Good luck.

Mar 30, 2009 | Lexmark X4270 All-in-One Multifunction...

Not finding what you are looking for?
Canon MultiPASS MP730 All-In-One InkJet Printer Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1986 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...