Question about Konica Minolta DiALTA CF910 Copier
Abnormally high toner density detected Black ATDC (auto toner density control circuit)
Replace black IU, check toner motors, make sure toner is loose not clumpy. Change dev reset toner level.
Posted on Nov 18, 2007
Tips for a great answer:
Apr 04, 2012 | Minolta DiALTA Di183 Copier
A condition of "EEPROM is not connected" or
"There is an access error" is detected in
EEPROM of the Imaging Unit.
So the issue lies within your Black Imaging Unit. I would try sliding the imaging unit out partially, then re-installing. Reset by switching off the main power.
If this does not solve the error then you will need to call your local service provider.
Good Luck and Thank You for using Fixya.
Sep 29, 2010 | Konica Minolta DiALTA Di200 Copier
Apr 14, 2010 | Konica Minolta DiALTA Di200 Copier
Dec 24, 2009 | Minolta CF1501 Copier
Mar 08, 2009 | Konica Minolta DiALTA CF910 Copier
Feb 18, 2009 | Minolta CF1501 Copier
Jan 20, 2008 | Minolta CF2001 Copier
Dec 19, 2007 | Minolta CF2001 Copier
Dec 18, 2007 | Minolta CF2001 Copier
813 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: