Question about Jenn-Air Grilling

1 Answer

Looking for a part for my Jenn-Air electric motor

Looking for a part for my Jenn-Air electric rotisserie motor model # CS-6018 that came with my Jenn-Air Stainless Steel Rotisserie Kit item # 58652. The part I am looking for is the round piece that is open at both ends with one end that fits inside the mortor and where the other end fits into the rotisserie rod to make the rod turn.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I broke the same part when trying to manually turn the shaft on a stuck motor. That part is made out of pot/white metal. Mine broke at the base where it slides onto the half round shaft on the motor. I was able to fix it by drilling a small hole in the half round shaft on the motor and the broken piece. Then I used a small finish nail as a pin to hold the two parts together. Next time I take it apart, I will use some JB Weld epoxy on it. I don't think you'll find that piece by itself. I might just tinker on my metal lathe and make one up, but looking on ebay is probably your best bet for the whole motor.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jenn- Air rotisserie burner wont lite. Doesn't


Try removing the cover on the back of the grill hood and finding the orifice for the rear burner. Check to see if the orifice is plugged.

Jul 31, 2011 | Jenn-Air Grilling

1 Answer

Trying to install the rotissere on our Jenn-Air outdoor grill. Instructions lost and the installation seems impossible!! Help!


I have instructions for model# 720-0093 Jenn-Air rotisserie, pretty simple, 4 bolts total. Must admit, I had to go back to Lowes for help since I was trying to install brackets the wrong way. Will be glad to email these to you, let me know @ caycebugs@sc.rr.com

Aug 16, 2010 | Jenn-Air Grilling

1 Answer

I am looking for an owner's manual for a Jenn-Air JED8430BDB. Can you help me. . Thank you.


I uploaded the owners manual.
Repair information is here
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=47639&diagram_id=653174#d653174

Dec 14, 2009 | Jenn-Air JED8430 Electric Cooktop

1 Answer

I'M LOOKING AT A USED COOKTOP BY JENNAIRE MODEL #JEC 8536ADW SERIAL #10672300CC. HOW CAN I FIND OUT HOW OLD IT IS. IT LOOKS ALMOST NEW


How old is my appliance?

Brand: Jenn Air
Type:
Country: USA
Model: JEC8536ADW
Serial: 10672300CC This product appears to have been manufactured February of 2003. (MAYTAG-10)

a1_logo.112x99.gif

Sep 29, 2009 | Jenn-Air 35 in. JEC8536A Electric Cooktop

2 Answers

Owner's manual


Farberware Rotisserie Manuals are available for download at http://openhearth.info

Nov 01, 2008 | Kitchen Appliances - Others

1 Answer

Jenn Air 720-0061-LP Gas Grill Rotisserie Problem


Hi all ,
I just bought a jenn air 720-0336 gas grill from bj's . the rear rotisserie burner would stop working after a few minutes .
hear is the deal , the rear inferred burner gets to HOT . they did not put any insulation between the ceramic blocks and the metal bezel.My fix was to remove the unit , drill out the 8 rivets holding the bezel on , carfully remove the bezel and install a fire proof gasket , i was abile to find the proper stuff at my local coal / wood stove retailer.it comes in a white sheet about 1/8 inch thick .
use steel rivets to reassemble . good luck . this took a week of trial and error to figure out .

Aug 02, 2008 | Grilling

2 Answers

Jenn-air grill


Cleaning burners"

May 25, 2008 | Grilling

2 Answers

Rotisserie won't stay lit


With our Kenmore, you need to increase the gas flow another 1/4 turn once it's lit.

May 25, 2008 | Grilling

Not finding what you are looking for?
Grilling Logo

Related Topics:

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Grilling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Jenn-Air Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...