Question about GE WDSR2080D Top Load Washer
My GE top load washer will fill with water, agitate and wash, but does not drain or spin. I turned on my washer and 1 hour later it was still running and had moved to a new cycle. I could not get it to drain or rinse on any cycle.
Inspect the drain hose for kinks
Test the timer control
Test the lid switch (some models)
Inspect the water pump
Inspect the drive belt (belt drive only)
Inspect the motor coupler
Posted on Jul 15, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Washer doesn't agitate
sounds like your washer went mellow on you(doesn't get agitated, right)?
ok. enough humor.
sounds like there's a problem with the motor/belt/control board in that order
Posted on Mar 13, 2008
I had the same problem and ended up replacing the control board which solved it. Contact Westland Sales at 800-356-0766 ext. 5 for tech support.
Posted on Jun 02, 2008
Hello, your problem is going to be with the lids switch, in this machine it is going to be a magnetic contact. You can confirm this my pulling the front panel off and accessing the wireing to the lids switch, If you have electrical knowledge bypass the lid switch using a wire nut and run the machine. If all is ok make sure you relpace the lid switch since it is there for a reason. If you have any other questions or concerns please feel free to comment again. Good Luck!!!
Posted on Jul 19, 2009
SOURCE: ge washer
Pull up sharply on the agitator to remove it from the shaft. Check the agitator mounting cup underneath it is probably stripped out. It is a replaceable part.
If the agitator is difficult to pull up,use a old strong leather belt under the agitator and pull it off using the belt.
Posted on Nov 08, 2009
Tips for a great answer:
Feb 06, 2013 | GE Profile WPRE6100G Top Load Washer
Jul 04, 2017 | GE Washing Machines
Jun 14, 2011 | Whirlpool LSR7333 Top Load Washer
Sep 26, 2010 | GE Profile WPRE6100G Top Load Washer
Jun 11, 2010 | GE WVSR1060A Top Load Washer
Sep 08, 2009 | GE Washing Machines
Apr 03, 2009 | GE WDSR2080D Top Load Washer
Nov 27, 2008 | Kenmore 22422 Top Load Washer
639 people viewed this question
Usually answered in minutes!