Sony CCD-TRV96 NTSC Eglish user's manual

I have Sony camera recorder CCD-TRV228E PAl Hi8.....
t is working OK,but i cant see anything on the display...
Somebody told me it was something like ICT orr TCI4 chip....
Can anybody tell me something about this probllem..??

It has a Physical damage

please help.... i have sony handy cam ccd-trv96. but its a japanese version i need an english version pls help me i cannot set-up the date and time. pls. help me......send me to my email add [email protected] thank you very much.......and god bless

You you need to transfer then through the dv jack, so you will need a d8 sony camcorder, or similar. Larry's Electronics

Download the manual from:
http://www.henrys.com/manuals/sony/CCD-TRV58(En).pdf

Please rate this solution as it helps us in helping you and others like you.

Are you using the correct input on your TV / VCR ?

Your camera is Analog model, can't connected directly with PC. You need to install some sort of "Analog-to-Digital video convertor card" in PC to digitize its audio-video output.

may be your camera not design to play the analog tape...there are some model that can playback a analog tape...i think your camera is for digital playback only.... check your user manual

Fidus, I am not sure where you are located but the camcorder you're trying to use now is a PAL version of Sony's 8mm camcorder. If the tapes you recorded earlier were recorded in D8 (digital 8) or 8mm/Hi8 format NTSC, they will not play correctly in this unit. The NTSC and PAL formats are different and not compatible. Hope this helps you. Joe Weibel customelectronics.org