Question about Vtech 9009111 Cordless Phone
2 months ago, 1 of my phone show "battery low" after a 10 minutes talk.. I thought it is the battery, so I bought new battery. Then, this month, ALL my phones (including the one on the base) start to say "battery low" only after about 10 mins talk. I have replaced the battery and still not work. The life time just get shorter and shorter... now I can only hold a 5 min talk and then I have to switch to another handset... Anyone have problem like this?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Not Registered
I had the same problem and this procedure fixes it! First, unplug the power to the main base (answering machine) for 20 seconds. Plus it back in. Put the phone that says "not registered" in the main answering machine. It will say "press the find handset for 4 seconds". Do that. It will run thru a series of stuff and will find the handset. It works! Rich (jambones.com)
Posted on Jun 01, 2007
You are pretty close to the solution. The problem is the charge detection in the handset. All handsets on a cordless phone detect the battery level with an hexadecimal value in the memory. Each hex value equal a volt value of the battery. EX: 3.5v = 9B
3.6v = 9C 3.7v =9D etc... The problem is the hex value in your defective handset are all mess up. So 9B is not 3.5v anymore. Then your handset could last 1hr after foul charge or doesn't alert you before the phone goes dead due to low BAtt.
Posted on Nov 21, 2007
from the troubleshooting section of the manual
• Unplug the base unit’s electrical power and remove the battery from the handset. Wait for 15 seconds then plug in the battery place the handset in the base unit and plug in the power. Allow up to one minute for the cordless handset and base to synchronize
not a guarantee, something to try
Posted on Aug 30, 2008
SOURCE: i want to add an additional handset to my vtech phone...the new handset is "searching for base" and requests a 15-digit number which is suppose to be on the base--there is no 15-digit number to input.
The 15 digit number shoudl be on a sticker on the bottom of the base unit.
Posted on May 19, 2009
Unfortunately that is the untold story about cordless phones they only have the capability of 1 open line be it the handset or or the base. There are some very pricey multi line systems, I have the same system bought two extra handsets and found out too late that I can only use them one at a time! Sorry probably not the answer you were looking for but thats the reality...
Posted on May 22, 2009
Tips for a great answer:
Apr 03, 2017 | Vtech Cars & Trucks
Mar 16, 2011 | Samsung Cell Phones
Jun 30, 2009 | Nokia 1680 Phone Unlocked FREE 1GB
Nov 23, 2008 | Vtech VT 2651 2.4GHz Expandable Cordless...
Jan 20, 2008 | Vtech mi6896 Trio Cordless Phone
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: