Question about Car Audio & Video

2 Answers

Hello, Your professional assistance please. I need to connect the audio from a new aftermarket DIN 1 DVD / TV TUNER / SAT NAV. / AM FM TUNER etc. INTO THE EXISTING Double DIN Mach 460 RADIO with in dash 6 STACK CD CHANGER. (Refer Photos) (Mach Code on back of stacker 1R3F-18C815-FC). Which unit will do the job ... if any. - "METRA 70-5519" ? - "USA Spec DFFORD1"? - BLITZSAFE FORD /AUX DMX V.1C RCA Aux In Adapter. - "PIE FRDN-AUX Ford Aux In Adapter". - IF NON, WHAT PRODUCT(S) DO YOU SUGGEST? My car is a 2001 Ford Mustang STV Cobra convertible (4.6 32V). There are two plugs plus the antenna (provision for 3 plugs) on the back of the DOUBLE DIN IN DASH MACH 460 UNIT. The plugs insert in the back left and right THE FEMALE SOCKET IN BETWEEN THESE TWO IS NOT IN USE. I can only hope you can provide the solution. I have friends in Florida that will order all the recommend products. Many Thanks, Denis.

Posted by on

  • OZcobra Jul 15, 2009

    I understand, I was hoping there would be an Expert on the Ford Mustang Cobra Vert. Mach Audio interface with a Aftermarket DVD player etc. It's hard for me to know that is why I went to your site.

  • OZcobra Jul 15, 2009

    Thank you, I will now move forward with the project taking your advice.



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,924 Answers

this was I believe your second choice,,,and if you want to keep use it like a mixer it should do the trick gues is that you plug the speakers into this ...and having 2 imputes can plug both the original radio ..and the new dvd on the same audio system ...look if the radio has already a stereo input to let it like it is ...and put the dual input through it a preamplifier ..if not will have to plug the dvd into one input ...and the radio in the other one ...and mix the sound signal ...and plug the speakers system to the dual input unit .....something like this ...but ...any of the device you already looked for and has a signal exit and a multiple input ..will do the job ...the issue is to have at peast a preamplif in it ...a few watts and have some equalizer deserve the trouble ...and the money ...good luck

Posted on Jul 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Its hard to tell sir specially when i cant see it in actual, you may try seeing a local audio technician to help you set up the the audio.

Posted on Jul 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you know were I can get a wiring harness for DDA 650W VALOR car stereo

no wiring diagrams found

only this
6.5" Double Din Size Fully Motorized IN-Dash Monitor w/DVD;
2 DIN;
16:9 Wide Screen;
Compatible with DVD/VCD/CD/MP-3/CD-R/CD-RW;
"True All-In-One" (no separate brain);
Built-in DVD;
AM/FM radio tuner;
Wireless remote;
3 video inputs;
1 aux input;
2 video outputs;
Front and rear audio outputs;
Subwoofer output with adjustable crossover;
Center channel output;
Reverse signal input for camera;
Dual zone playback function;
AC-3, Dolby Prologic II;
Dolby digital surround (5.1CH) audio output;
PAL/NTSC compatible;
DVD/CD changer interface;
5 x 45 watts;


Oct 23, 2016 | Cars & Trucks

1 Answer

Nitro car stereo manuals

Need settings code for an Nitro BMWX-4756 300Watt 7" Touch Screen Monitor In Dash Din DVD CD AM FM for the gps, settings it's a 4 digit code to change GPS settings

May 01, 2015 | Nitro Bmw-4741t In-dash Touch Screen...

1 Answer

Soundlogic XT 5 in 1 wireless headphones will not receive audio from tv; only gets radio stations.

Did you connect the base/transmitter piece to the AUDIO OUT jacks on the back of the TV ? The radio you are listening to is the built-in FM radio/tuner. You need to connect the transmitter to an audio source (TV, PC, CD/DVD player, etc.) to receive sound from that source.

Jan 04, 2015 | Audio Players & Recorders

1 Answer

Pioneer 409 setting up for surround sound

I think there is a switching problem in the surround receiver. I would take the receiver to a qualified servicer. There is nothing user serviceable in the unit. Question .Why are you using optical output from ps3. I recommend you connect all you a/v devised to the tv. Then connect the opt out of tv to receiver. that way what ever you are viewing will send audio via opt out of tv to receiver. that way you do not have to switch input on receiver. Hope this helps.

Jan 07, 2014 | Pioneer VSX-D511 Receiver

3 Answers

Common Issues with Crown Ouku 7 Touch Screen 2 Din Car Stereo Dvd Player Radio Bluetooth Ipod Tvcamera

how can you hook up an aftermarket amp to your Ouku 2 DIN DVD player? i can't figure this out and iv looked everywhere.

Sep 24, 2012 | Crown Ouku 7 Touch Screen 2 Din Car Stereo...

1 Answer

Can I Connect my laptop to my tv?

yes, if you have the DIN sockets on both laptop and's rare...TVs dont have DIN sockets if they do have the wiring system is little differnt from the ones on laptops...
else you may need an additional equipemt, something like external TV tuner card box
it will have the provision to connect you laptop to the tuner box and the tv tuner box will have the video and audio jacks to go to the TV

Dec 06, 2009 | Apple MacBook Pro Laptop Computer with...

1 Answer

Can't record from tv to dvd

I think you would have to run your sat line through the DVR-1600 first (Line In) then connect directly from the DVR to one of your TV Line-Ins (Audio R, Audio-L, S-Cable Video).
And then use the Cyberhome TV Tuner to record off your sat.

Jan 24, 2009 | Cyberhome DVR 1600 DVD Recorder

1 Answer

Disc error

I have a 08 Cherokee SRT8 that did the same thing. I took my radio out and unplug it from the back to disable it from getting power. Waited a min then plug it back up. Note: if it does it again, replace head unit. Unit is going bad. I replaced mine w/ a aftermarket Pioneer double din with navi using all the factor plugging and steering controls.

Mar 31, 2017 | Jeep (82208269) 6-Disc CD Changer

2 Answers

Hooking up home theater

Run a regular RCA type audio cable from your TV audio out to your Home Theatre audio in. That is what I have done recently with my Samsung LCD and Home Theater. You then have to put your Home Theater on Aux 1 or Aux 2 to get the sound from TV. Ensure your TV's volume is off.

Nov 04, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

76630 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides