Question about Ovens
How do i remove the control panel cover to replace the electronic control
Tips for a great answer:
F1 Error indicates a bad control board and the control board
(electronic control) should be replaced to solve this issue. Hope this
helps...please post back for further assistance.
Aug 06, 2011 | GE Built-In 24" Double Electric Wall Oven
Jul 20, 2011 | GE JKP45 Electric Double Oven
Jan 03, 2011 | GE Ovens
F1 touch pad / ERC test This simple test will help determine
whether the ERC (Electronic Range Control or Clock) or the touch pad is
defective when F1 error code is present.
Note: Some models incorporate the touch pad in to the ERC as a single
assembly, in which case this test is not necessary. Simply replace the ERC
Warning: If you feel in any way uncomfortable performing this test or
making this repair, please contact a qualified appliance repair technician.
1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound)
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.
Dec 16, 2010 | GE Built-In 24" Double Electric Wall Oven
Mar 23, 2010 | GE PT956CMCC Profile 30" Built-In Double...
May 27, 2009 | GE Built-In 24" Double Electric Wall Oven
Apr 27, 2009 | GE Ovens
Aug 06, 2008 | GE JKP30WMWW 27" Built-in Single Electric...
Nov 17, 2006 | GE Profile JTP56 Electric Double Oven
1,335 people viewed this question
Usually answered in minutes!