Question about Transcend 8GB SSD, 2.5- Inch, IDE, SLC Hard Drive

2 Answers

Icant see my usb flash drive in my computer

I cant see my usb flash drive in my computer, even the computer indicates that a new hardware has been installed and recognize it, and when i view the hardware components in my computer i can see that the flash has been installed correctly.
i am using a winxp OS, can any body help me plz

Posted by on

  • aiman_omary Jul 15, 2009

    Thanks Very much for your help Mr. Damilare, but for the matter of fact that i tried this way, but i couldn?t see any of the drivers but the CD, even the hard disk is not listed there, but if do right click on my computer and choose system properties then device manager then hardware, i can see that the flash and the hard disk are listed there.
    what do you think now ??!!!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 358 Answers

You can try this out:
After powering up your system, and you have plugged the flash drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your flash drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your Flash Drive to be detected automatically.
Hope this helps you out.
Goodluck!

Posted on Jul 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 65 Answers

Firstun install usd driver ,using software uninstaller freeware you need to down load it from goole then uninstall again install usb driver in parent partation it shall work,
domnickr

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem for Transcend 4GB JetFlash 110 USB 2.0 Flash Drive My pen drive gets heated up and not recognised by computer. what can i do. pl. help


when i plug in my TRANSCEND 4GB USB DRIVE,i got the connecting tone,connecting msg(found new hardware:mass storage device And finnaly problem occured during hardware installation,your new hardware might not work properly).ssuppose if i unplug it i can hear the removing tone.PLs help me to resolve this.........

Aug 24, 2010 | Transcend 4GB JetFlash 110 USB 2.0 Flash...

2 Answers

How to copy a doc. file to the flash drive.


Ok. here is what you need to do.

1. Hook your flash drive to any of the usb slot in your computer.
see image below bcfce55.jpg

Wait for the system to read it. A green arrow icon will appear in the taskbar to show that a new removable hardware device is connected. After it successfully recognized, It will display a message " The device is installed and ready to use" at the lower right portion of the windows taskbar.

Click on My Computer a new drive will appear. It is usually designated as removable drive. On this drive you will paste the copied doc files. It is the assigned drive for your flash drive.

So go on., copy all the files you need to carry and paste it in the flash drive.

Be reminded also that before you unhook the flash drive from the computer, right click first on the green arrow icon on the taskbar and stop the operation. Click stop on the flash drive. This will turn off the remaining applications / readings in the flash drive and will prevent it from crashing and file corrupting.

I hope you understand.
Please give me some good ratings as this will help me too.
Thanks.

Aug 14, 2010 | SanDisk Cruzer Micro 8GB USB 2.0 Flash...

2 Answers

I've tried to put things on my usb but whenever i put it in a computer they all say that it doesn't recognize the hardware


All Portable HD are Plug and play devises. But sometimes they require softwares. So read your manual for further details.
Think this is helpful !

Aug 11, 2010 | Dane-Elec DaneElec 4GB USB Drive Copper...

2 Answers

How do you save files on a sandisk cruzer flash drive?


Insert the cruzer into the usb port. You should see a message pop up and say new hardware found and then flash off. It may also say usb memory or storage device or even recognize it as the cruzor. This recognition process is fairly quick say 5-10 seconds. After that the computer knows what the cruzer is and its ready for use.

The cruzer is now seen as another drive or storage drive on your computer. Your hard drive is usually C , the CD/DVD would be D drive and the cruzer would be seen as E. If you are in a program and want to save to the cruzer you open the file/save and you should see E drive or Cruzer if not click on my computer and look for it there. Once you find it just click on it and then hit save/ok. Thats all there is to using one. Once you know how to find it as a save option or a loading option then you just treat it like a hard drive.

Once you get it sorted out you will use it a lot. They are very handy.

Jun 01, 2010 | SanDisk Cruzer Titanium 2GB USB 2.0 Flash...

2 Answers

I CANT FORMAT MY MEMORY CARD....I DONT KNOW HOW TO FIX IT.


  1. Open control panel.
  2. Open administrative tools.
  3. Open Computer management.
  4. In the left column click disk management.
  5. This populate all the disk present
  6. Locate your memory card
  7. Then you can delete the partition entire and build new one
  8. You can format with Fat Or FAT32 file system
  9. Do not perform quick format.

Another options are available to format via cmd
To do that
At the run Menu type:CMD
then a command promt window will open
Type format x: /fs:fat32
Note that x is volume label (memory card drive label may d, e or f)
ok
try this



Feb 25, 2010 | Sony 4GB Memory Stick PRO Duo Memory Card

1 Answer

My copmputer wont let me install a sandisk cruzer


Check you have your chipset drivers installed if not go to manufacture's website and download from there what Operating System do you have?Right click over my computer drop down to properties,click on hardware,click on device manager and make sure there is no yellow explanation points and see that all drivers are installed correctly.Have you plugged the sandisk into another computer to see if it is accessible on another machine?

Aug 08, 2009 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

Flashdrive not working


1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW_2.2.3_MASTER.exe

2. Format

(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)

Jun 27, 2009 | iLO (2 GB) MP3 Player

1 Answer

Can't open the drive


Sometimes there is an issue assigning a drive letter. You can try to assign one via right clicking on My Computer and select Manage. Go down to Disk Management and find your USB drive. You can right click it to reassign it a different drive letter, one that is not being used. Hope that helps, let me know if this does not fix it, as there are more steps to try, just a bit complicated.

Apr 20, 2009 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

Cant get photo's to come up on computer/frozen usb


hi there...it's indicate there is a vrus in your flash drive.. the virus is hiding and manipulate your file so you can't the file when connected with your computer.
if you have recovery program that already install at your computer you can backup the file that you need after you format the flash drive. but if you don't have program don't format the flash drive.
maybe you can visit a nearst software store and asking recovery program (ex: office recovery) buy it, install to your computer and you can formatted the flash drive back up your photo using media heal for removeable drive...good luck..

Feb 02, 2009 | SanDisk Cruzer Micro 8GB USB 2.0 Flash...

Not finding what you are looking for?
Transcend 8GB SSD, 2.5- Inch, IDE, SLC Hard Drive Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Transcend Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Are you a Transcend Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...