Question about Brother HL-2040 Laser Printer

1 Answer

Paper led light wont stop flashing

My Brother HL-5240 wont recognise a full paper tray and so the paper led light wont stop flashing. There is full toner and a new drum. I have tried holding down the 'go' button with the cover open to reset all the led lights but it hasnt done anything. there are no jams or backlogs-it just stopped mid-job.
any ideas would be much appreciated!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 46 Answers

Pull the tray out and make sure the back guide is pushed against the paper. The back guide tends to move easily on these models

Posted on Aug 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer brother HL 5240 making knoking sound while trying to pull paper and does not print.


i had that for awhile until i realized i didn't have the tray that held the paper fully extended. once i figured that out it has not been knocking. now i have toner light on, its always something

pull the tray out and make sure in the back of the tray it is full extended, the paper will lay nice and flat.
hope that works for you like it did for me

Apr 09, 2010 | Brother HL-5240 Laser Printer

1 Answer

How do you replace the drum properly on a Brother HL-5240


Out with the old and in with the new, you remove the toner and drum together, remove the toner from the old drum by pressing the blue lever on the side, install the toner in the new drum, and re install in the printer. With the front door open press the go button til all lights flash and then close the door, the new drum is reset.

Nov 20, 2009 | Brother HL-5240 Laser Printer

1 Answer

Red Priner LED Wont stop flashing


it is problem paper jum.please chack it then solve your problem

Jul 24, 2009 | Brother HL-2040 Laser Printer

1 Answer

Brother HL 5250 red light flashing


I found this solution on the web-- Hope it helps.

The HL-2070N gets stuck in a toner end-of-life error condition. Perform the following to clear :
With paper loaded, new toner in,

Open front door
Turn off printer
While holding down the GO button, turn printer back on
When all four LEDs light up release GO button. All LEDs will turn off
Press the GO button 2 times. The 3 LEDs (toner, drum, paper) will light up solid
Press the GO button 5 times
Paper light will be blinking
At this point the toner end-of-life condition has been reset. Close front door.
BTW, I got this from Brother Support. Also, just a reminder, timing is important here so don't pause between button presses.

Jan 28, 2009 | Brother HL-2070N Laser Printer

2 Answers

The drum light came on (Brother HL 5240) and I replaced the drum with a new one and it still will not work... Any suggestions?


I continued looking and found where someone else had the same problem. I opened the front cover, held down the go key for 10 seconds and closed the door. This reset something because it works now.

Thanks

Jan 20, 2009 | Brother HL-5240 Laser Printer

2 Answers

My Brother HL 5240 has Status toner, drum and paper lights on, I bought it on 4/30/08, new toner, plenty of paper, it showed on computer: printer is off line, but it was connected with computer. Really...


The drum light will flash on my brother HL-5240 Laser Printer when printing but it continues to print just fine. Does this mean the drum needs to be replaced?

Aug 07, 2008 | Office Equipment & Supplies

2 Answers

Brother Hl 5240 printer- toner light on


1) Turn off printer
2)Turn back on
3) Remove Drum and Toner.
4)Press Go for 1 second(it appears to do nothing)
5)Put Drum and Toner back in.
6)Press Go for 1 second(it appears to do nothing)
7)Close door.
Try that

May 30, 2008 | Brother HL-5240 Laser Printer

2 Answers

Won't print


This indicates that the fuser req' replacement but it can also be
a mpcb fault.
If the problem occured during a flash storm i would go for the
mpcb.

mongrelken.

May 21, 2008 | Brother HL-2040 Laser Printer

2 Answers

Brother 5240 laser printer changed toner still wont work.


This works on several different Brother Printers to get rid of toner/drum empty errors:

1. Open the front cover and leave open while completing the following steps.
2. Turn the printer off.
3. Hold the 'go' button while turning the printer on. All panel lights should be on.
4. Release the 'go' button.
5. Press the 'go' button 2 times.
6. Pause.
7. Press the 'go' button 5 times.
8. The toner light should be off.
9. The paper light should be on or flashing [doesn't happen on all].
10. Close cover. The ready light should be the only light on.

Oct 20, 2007 | Brother HL-5240 Laser Printer

Not finding what you are looking for?
Brother HL-2040 Laser Printer Logo

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...