Question about Video Game Consoles & Games

1 Answer

Xbox 360 DVD drive problem.

I bought a new xbox 360 last week, it was just working fine but 2 days before its tray starts stuck while turn On the xbox, and today it is totally dead, not even opening and closing, and green light in the middle of ring is blinking continues. i cannot use my dvd drive anymore, but xbox itself is working fine except its dvd drive.manually i eject the dvd tray but still it is not even reading my dvd. i live in Pakistan and it has no warranty,plz help me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

SORRY,HEAR THERES NO WARRANTY,BUT X-BOX WILL SEND U A NEW ONE BECAUSE THAT IS A FACTORY DEFECT CALLED THE RIING OF DEATH,CALL THE 800 NUMBER AND GIVE THEM SERIAL NUMBER AND THEY WILL MAIL U A BOX TO PUT IT IN AND MAIL TO THEM

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GAMES GOT STUCK IN THE XBOX 360 HALO EDITION THE 3RD TIME i USED IT


It needs a new drive chassis, you will have broken the little plastic tabs that hold the tray level and straight! you can replace the drive but the new drive will need either the old logic board off the broken drive fitted to the new drive or the dvd key dumped off the old drive and flashed to the new one to make it work.

Dec 23, 2012 | Microsoft Xbox 360 Halo 3 Special Edition...

Tip

Xbox 360 - Stuck or sticking tray fix!


If your Xbox 360 DVD drive won’t eject it can be a very simple fix.

The Samsung drive is almost always a very simple fix, if you have another drive, it may be more difficult.

To identify your drive, follow this guide:

• Remove the faceplate by firmly grasping the opening for the USB ports and pulling.
• Underneath the DVD tray there should be a small hole.
• Look at the wires in the hole to identify which drive type you have.

Red and Black Wires = Samsung Drive
Yellow Wires = LiteOn Drive
White Wires = BenQ Drive
No Wires = Hitachi Drive


SAMSUNG:

It is very common for a Samsung drive to not eject. It’s a very simple fix for this!

1. Power on your Xbox 360
2. Press the eject button
3. When the Xbox 360 “tries” to eject, just simply push in on the tray cover.

That should make it eject!

If it does not, please follow the guide for the other drives below:

This requires you to disassemble your Xbox 360. IF you don’t know how, look it up on google, there are plenty of guides.

Then follow these steps:

1. Remove your Xbox 360 DVD drive from the Xbox 360
2. Turn over and remove the four screws securing the drive (6 screws if it’s a Hitachi)
3. Remove the top cover of the DVD drive.
4. Put the drive back in the Xbox 360, connect the wires, and power on your Xbox 360.
5. Once the 360 powers on, eject the drive. Most of the time it should eject normally. If it doesn’t you may have to force it.
6. Unplug the Xbox 360. If you turn it off with the power button the tray will close first, we need it open.
7. Near the front of the drive, you should now be able to see and access a small rubber band that was hidden by the tray.
8. Remove the band, lubricate and replace.
9. Replace the top cover and hook up and test.
10. If that doesn’t work, you may need a new rubber band. If you can get one of the right size, replace and test.

on May 13, 2010 | Video Game Consoles & Games

Tip

If your Xbox 360 Disc tray won't eject


If your Xbox 360 DVD drive won’t eject it can be a very simple fix.

The Samsung drive is almost always a very simple fix, if you have another drive, it may be more difficult.

To identify your drive, follow this guide:

• Remove the faceplate by firmly grasping the opening for the USB ports and pulling.
• Underneath the DVD tray there should be a small hole.
• Look at the wires in the hole to identify which drive type you have.

Red and Black Wires = Samsung Drive
Yellow Wires = LiteOn Drive
White Wires = BenQ Drive
No Wires = Hitachi Drive


SAMSUNG:

It is very common for a Samsung drive to not eject. It’s a very simple fix for this!

1. Power on your Xbox 360
2. Press the eject button
3. When the Xbox 360 “tries” to eject, just simply push in on the tray cover.

That should make it eject!

If it does not, please follow the guide for the other drives below:

This requires you to disassemble your Xbox 360. IF you don’t know how, look it up on google, there are plenty of guides.

Then follow these steps:

1. Remove your Xbox 360 DVD drive from the Xbox 360
2. Turn over and remove the four screws securing the drive (6 screws if it’s a Hitachi)
3. Remove the top cover of the DVD drive.
4. Put the drive back in the Xbox 360, connect the wires, and power on your Xbox 360.
5. Once the 360 powers on, eject the drive. Most of the time it should eject normally. If it doesn’t you may have to force it.
6. Unplug the Xbox 360. If you turn it off with the power button the tray will close first, we need it open.
7. Near the front of the drive, you should now be able to see and access a small rubber band that was hidden by the tray.
8. Remove the band, lubricate and replace.
9. Replace the top cover and hook up and test.
10. If that doesn’t work, you may need a new rubber band. If you can get one of the right size, replace and test.

on Feb 02, 2010 | Video Game Consoles & Games

2 Answers

Xbox 360


Most likely your disk or dvd drive is dirty. Run the disk through a disk cleaner and run a dvd cleaning disk through your drive.

If that dos not work, try removeing disk, close drive, turn off console, unplug power supply, wait 10 or 20 seconds, then reconnect power supply and try again.

If that fails, assumeing other disks will read, your disk may have a major flaw. You can check with your local game store, they often have a machine that may restore your disk, (most places that I know of charge like 1 or 2 $).

Mar 10, 2010 | Microsoft Xbox 360 Console

2 Answers

Xbox 360 120gb hdd wont format


mine just did the same thing. bought it from walmart last month now i have to return it luckily they have a 90 day policy and can exchange for a new one instead of mailing it to xbox and waiting almost 2 weeks. my hardrive did however work in a different xbox just not on my console. sucks lost all my saved & installed games now gotta go back to blockbuster and re-rent the games so i can install them again! if you cant return yours, xbox will pay for your shipping you can print the shipping tags online from xbox.com

Mar 02, 2010 | Microsoft Xbox 360 Elite Console

1 Answer

I have a new xbox 360 2 weeks old and already saying open tray with new disc why is this


There is obviously a fault with the dvd drive motor, take it back to the shop where you bought it from, if the console is faulty, after such a short time they should replace no questions asked.

Jan 10, 2010 | Microsoft Xbox 360 Console

1 Answer

Xbox 360 not reading discs


This is going to be a bit long -- but very detailed, so please read it carefully. There are several reasons that an xbox 360 system will have problem reading discs. The error messages also vary from unreadable disk, no message at all but the game skips, "please insert disc in a 360 console" to "open tray." There are a few reasons this may happen:

1. Bad disc. Check the back of your disc for scratches. If it looks good (or plays fine in another console), then the disc is probably fine. Also-- try more than 1 game to be sure.

2. Bad laser. The XBox 360 has a DVD drive very similar to a PC's DVD drive inside. The drive contains a bunch of parts including a few motors and gears and a laser. The laser is the part that actually reads the disc. The reality is... with all the hours and hours of gameplay, lasers do eventually wear out. The laser isn't very easy to replace, but it is replaceable. You can find any and all XBox 360 lasers at the following website:

http://store.richspsxparts.com/xb360ac.html

3. Bad DVD Drive. Sometimes other components inside of the DVD drive can become bad such as the motor that spins the disk, the motors that open the tray, etc, etc. You can get a new DVD drive to just replace everything, including the laser, in one shot but there is a catch. The XBOX 360's DVD drive is tied to the motherboard using a software lock. The easiest way to overcome this lock is to buy the exact same manufacture DVD drive that is in your system now, remove the circuit board from the old DVD drive (which contains the software key) and transfer the circuit board into the new DVD drive that you purchase. If you do this simple procedure, there is no flashing involved. The following website carries DVD drives and also provides instructions on swapping the circuit board from the old drive into the new one.

XBox 360 parts: http://store.richspsxparts.com/xb360ac.html

DVD Drive Swap Info: http://store.richspsxparts.com/imnooninxb36.html

Nov 17, 2009 | Microsoft Xbox 360 Console

1 Answer

Open tray error


This is going to be a bit long -- but very detailed, so please read it carefully. There are several reasons that an xbox 360 system will have problem reading discs. The error messages also vary from unreadable disk, no message at all but the game skips, "please insert disc in a 360 console" to "open tray." There are a few reasons this may happen:

1. Bad disc. Check the back of your disc for scratches. If it looks good (or plays fine in another console), then the disc is probably fine. Also-- try more than 1 game to be sure.

2. Bad laser. The XBox 360 has a DVD drive very similar to a PC's DVD drive inside. The drive contains a bunch of parts including a few motors and gears and a laser. The laser is the part that actually reads the disc. The reality is... with all the hours and hours of gameplay, lasers do eventually wear out. The laser isn't very easy to replace, but it is replaceable. You can find any and all XBox 360 lasers at the following website:

http://store.richspsxparts.com/xb360ac.html


3. Bad DVD Drive. Sometimes other components inside of the DVD drive can become bad such as the motor that spins the disk, the motors that open the tray, etc, etc. You can get a new DVD drive to just replace everything, including the laser, in one shot but there is a catch. The XBOX 360's DVD drive is tied to the motherboard using a software lock. The easiest way to overcome this lock is to buy the exact same manufacture DVD drive that is in your system now, remove the circuit board from the old DVD drive (which contains the software key) and transfer the circuit board into the new DVD drive that you purchase. If you do this simple procedure, there is no flashing involved. The following website carries DVD drives and also provides instructions on swapping the circuit board from the old drive into the new one.

XBox 360 parts: http://store.richspsxparts.com/xb360ac.html

DVD Drive Swap Info: http://store.richspsxparts.com/imnooninxb36.html

Nov 11, 2009 | Microsoft Xbox 360 Console

1 Answer

I have just bought a brand new game and it has taken about 30 attempts to even load it kept saying open tray. Has loaded updates but when i get the play game on menu it then tells me to re-boot or clean...


This is going to be a bit long -- but very detailed, so please read it carefully. There are several reasons that an xbox 360 system will have problem reading discs. The error messages also vary from unreadable disk, no message at all but the game skips, "please insert disc in a 360 console" to "open tray." There are a few reasons this may happen:

1. Bad disc. Check the back of your disc for scratches. If it looks good (or plays fine in another console), then the disc is probably fine. Also-- try more than 1 game to be sure.

2. Bad laser. The XBox 360 has a DVD drive very similar to a PC's DVD drive inside. The drive contains a bunch of parts including a few motors and gears and a laser. The laser is the part that actually reads the disc. The reality is... with all the hours and hours of gameplay, lasers do eventually wear out. The laser isn't very easy to replace, but it is replaceable. You can find any and all XBox 360 lasers at the following website:

http://store.richspsxparts.com/xb360ac.html

3. Bad DVD Drive. Sometimes other components inside of the DVD drive can become bad such as the motor that spins the disk, the motors that open the tray, etc, etc. You can get a new DVD drive to just replace everything, including the laser, in one shot but there is a catch. The XBOX 360's DVD drive is tied to the motherboard using a software lock. The easiest way to overcome this lock is to buy the exact same manufacture DVD drive that is in your system now, remove the circuit board from the old DVD drive (which contains the software key) and transfer the circuit board into the new DVD drive that you purchase. If you do this simple procedure, there is no flashing involved. The following website carries DVD drives and also provides instructions on swapping the circuit board from the old drive into the new one.

XBox 360 parts: http://store.richspsxparts.com/xb360ac.html

DVD Drive Swap Info: http://store.richspsxparts.com/imnooninxb36.html

Nov 11, 2009 | Microsoft Video Game Consoles & Games

6 Answers

Error E 68


This behavior occurs when an Xbox 360 Hard Drive hardware failure occurs.
1. Turn off the console. 2.
Remove the hard drive. For more information about how to attach or remove the Xbox 360 Hard Drive 3.
Reattach the hard drive, and then turn on the console. 4.
Obtain the latest automatic update for the Xbox 360. To do this, connect to Xbox Live. 5.
If you continue to experience this behavior, contact Xbox Customer Service.

Oct 13, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

James Wishart

Level 2 Expert

122 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...