Question about Goldstar MV-1320W/B Microwave Oven

1 Answer

Dear Sir, I have a Goldstar MV-1320W microwave. Tonight, for no apparent reason a loud blowing noise started. It sounded different than the usual fan and would not respond to anything from the keypad. I had to disconnect it to get the blowing noise to stop. When I reconnect the blowing starts up again.What's wrong? And how do I fix it? Much appreciated! John

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

I'd suspect the relay located on the pcb to be shorted, as in the contacts welded/stuck together.  This isn't available separately from Goldstar, as it comes with the circuit board.  The board will probably be prohibitively expensive.  If you have the know-how, remove the board so as to make working on it easier.  Remove the relay lid and using a points file or emery cloth, clean them up.  My experience with this, is the repair works great.  The relay lid may never fit again, as most of them are "sealed", and not designed for removal.  Of course, a replacement relay with roughly the same specs could replace the defective one.  These are usually 120v spst, normally open.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven quit working on model mv-1320w


That would be a defective door switch, most likely the bottom one.

(It's either the top or bottom switch (not the middle one) and whichever one has thicker wires, not the one with the thinner wires.)

See my help text file on door switches here.

To order other Goldstar / L.G. parts besides door switches, visit Encompass. You'll probably have to call them at 866-779-5835 to get part numbers.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 27, 2012 | Goldstar Microwave Ovens

1 Answer

The scrolling speed for the timed cooking is running incredibly fast - too fast to allow the food to cook. I was looking for a manual for Model #MV-1320B.


The owner's manual can be found here.

It sounds like the oven has been placed in "demo mode".

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 14, 2012 | Goldstar MV-1320W/B Microwave Oven

1 Answer

Everything appears to be working with our microwave except it is not heating or cooking. All other functions appear to be o.k. I am not 100% sure of the model number and I'm not at my house to get that...


To allow us to help you effectively (at no charge), please post a NEW problem to FixYa, and please include your brand name and the full model number from the tag in or on the unit, your symptoms ("runs but no heat"), as well as the answers to these questions:

- When you try to microwave are the inside light, internal cooling fan and turntable all working?

- Is there any unusual noise or is it louder or quieter than normal?

(A loud buzz, hum, or groan is usually a shorted high voltage rectifier diode, but a sound like gurgling into an empty coffee mug is one symptom of a failed magnetron, and yet the mag can be bad without that sound.)

We have a sound clip here of what a microwave should sound like when the cooling fan and high voltage section are working.

Nov 22, 2009 | Goldstar MV-1615 Microwave Oven

1 Answer

Goldstar model mv1526.Sometimes the fan comes on by itself and the only way to stop it is to unplug it for a few hours. The fan off on button does not stop it even though it reads fan stop.


Contact the manufacturer (Goldstar) about that--it sounds like your microwave definitely needs to be repaired, especially since you've already tried unplugging it (which is the first thing a technician would suggest that you try). Usually, the manufacturer can tell you how to get your microwave repaired or replaced, and if it's still under warranty, the repair/replacement may even be free!

Goldstar's phone number (according to their website, www.goldstarappliances.com ) is (800) 243-0000


Good luck! :)

Aug 26, 2009 | Goldstar MV-1526 Microwave Oven

1 Answer

Goldstar microwave


Open the cover and look for a fuse. If it's not blown then the power tube (klystron?) is probably fried.

Mar 27, 2009 | Goldstar MV-1526 Microwave Oven

1 Answer

Ge above range microwave, when it is turned on it makes a rattili


is this noise a loud noise or low. and tell me the make and what the model. please

Mar 20, 2009 | Goldstar MV-1501 Microwave Oven

1 Answer

I have a nine year old Goldstar over the Range microwave. It usually works great, however I need to replace the brown circle on the top of the range it sparks and now has a hole in it, I don't want a fire....


I'm just a typical homeowner who just replaced one for an MV-1310W.
Here's the info on the bag sticker:

3301W2A017A
Desc: Cover Assembly, Stirrer Fan
Spec: AL 1.3Cu.Ft MV-1350M

Hope it helps...

-Bob.

Mar 10, 2009 | Goldstar MV-1310W/B Microwave Oven

1 Answer

Goldstar keypad not working


If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

If you would like to have us do this for you, we do that for $39.95 plus part costs.

Please feel free to contact me directly if you need more help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Aug 22, 2008 | Goldstar MV-1320W/B Microwave Oven

1 Answer

Goldstar MV1526W over the range microwave


We actually have the service manual available at our site:
http://www.microwavedisplay.com/mv1526_sm.pdf

That should help you or a friend check and diagnose it.

We're happy to help and we appreciate your thoughtful rating of our answer.

Feb 10, 2008 | Goldstar MV-1526 Microwave Oven

2 Answers

Hood lights


first remove mains cord from main power. and remove the microwave oven top cover and check the bulb and crefully remove the old bulb and put new bulb. at high voltagae section dont touch any thing ,that area very dangerous ,thats why very carefully work inside the microwave oven ..

Sep 09, 2007 | Goldstar MV-1320W/B Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Goldstar Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Goldstar Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...