Question about Singer 7462 Mechanical Sewing Machine

1 Answer

CE-4000 brother sewing machine error

On my CE-4000 i receive a F4 error message. the only thing i can find from the manual or the brother support website is that i need to have my unit serviced. can you please tell me what exactly is wrong. i don't want to pay lots of money to have a simple issue resolved. Additional information: i recently had new carpet put in and the workers may have banged up the sewing machine moving it in a box.

Posted by on

  • cb1997 May 11, 2010

    My research indicates you have a F04 error (like many others.  F4 error revealed next to nothing, and F04 indicates you're not alone here.

    The only thing I found online was that turning it on/off repeatedly (could be fifty times) will probably make it usable for a bit, but that's all.  Not a very good work-around.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 52 Answers

F4 means that the machine is losing a disconnect from the foot control which could mean a main pc or new foot control

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E1 error brother ce 4000


Hi.
You can get the E1 error if the presser foot is not down. If you use the walking foot attachment it can keep the foot from coming all the way down.

Apr 08, 2017 | Brother CE4000 Computerized Sewing Machine

1 Answer

How to trouble shoot without a manual?


you can download a free manual at //www.generalmanual.com/Home-Sewing-Embroidery-Machines/Brother-CS-6000i-Sewing-Machine.htm


F4 might mean that the bobbin on the top is in the position for rewind, slide bobbin to the right for the error code to go away. Hope this helps, Sandy

May 03, 2014 | Brother CS-6000i CS6000i 60-Stitch...

1 Answer

E2 error message


I have brother sewing machine CE 4000, it became jam, I opened the machine & tried to rotate it with hand, I took out the belt, it became easy to move, again fixed the belt, but now it does not turn on, may be the timing of belt has disturbed, it shows Er2, how to fix it.

Dec 09, 2011 | Brother CE4000 Computerized Sewing Machine

1 Answer

What is the Brother Pacesetter NX-200 F4 machine error, and how do I fix it?


You will receive F4 error message, when there is a problem within the unit, internal circuit board.
Your Brother Sewing machine need to be service.

Good Luck.

Oct 19, 2011 | Brother Sewing Machines

3 Answers

E6. Motor locked up because the thread is tangled. I have re-threaded machine and bobbin; thread still tangles after 2 or 3 stitches. HELP!


In my Brother CE-4000, it appears as though the feed dogs (which you can change to a higher position or a lower position) are allowing the bobbin case to spin all the way around and then the needle hits the bobbin case. When the feed dogs are in the lowest position, the bobbin case does not spin all the way around when the needle moves up and down (and therefore the needle does not get stuck in the bobbin case. I am wondering if this is a problem with the feed dogs/case?

Jan 18, 2011 | Brother CE4000 Computerized Sewing Machine

1 Answer

My brother CE 4000 sewing machine freezes. After some tinkering I can sew a little then in happens again. It makes a shuddering noise then freezes and shows an E6 error message?


Turn off the power and remove the needle and presser foot.

Remove the needle plate, bobbin and bobbin case.

Clean the shuttle and surrounding area.

Replace everything.

Make sure the flat side of the needle faces to the back of the machine.

Raise the presser foot and re-thread the machine.

Mar 06, 2010 | Brother Sewing Machines

Not finding what you are looking for?
Singer 7462 Mechanical Sewing Machine Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Cindy Wells

Level 3 Expert

5183 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...