My Parrott ck300 has worked fine for a few years when i got in to my car tonight it said connectiion problem, tried resetting it but nothing happens it should say when reset pair device.

http://gethuman.com/phone-number/Parrot-USA

877-972-7768

Average Wait: 12 mins - 24 hours, 7 days

Could be a windshile leak down the A-Pillar & water
gets into the delayed accy relay for the GEM Module
(Body Computer as ford called it for a few years) & you
get what you have now

Try Goolge as I did a few weeks ago for a relative
He had the same issue with the blower being on &
killing the battery

No real fix I found for the windshield leak
Seem a robot didn't put the rubber sealant
on correctly at the factory fo about 5 years
on several fords.

If it isn't water related then the GEM Module
controls all those body features

If you get a used one & match up the numbers,
you supposedly can avoid buying a reman gem
& the expense of having to reflash it to your factory
built combination

there is a problem with the new settings in the new update so try to revert to default settings before the update

Try www.manualowl.com

turn it off and on a few times if that dnt work look up your phone online

Restart your notebook and open it on safe mode...then use system restore or if you have installed an antivirus before it happens uninstall it..

spoke w/ Cuisinart. Unplug unit for 1 hr, then plug back in, reset clock & Auto Off setting. This resets the unit back to the factory settings.

HOT WIRE BLOWER MOTOR IF IT WORKS PROBLEM IN THE BLOWER RELAY AND RESISTOR.IF BLOWER DONT WORK REPLACE IT.

This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.

Try unpluging the unit from the wall for about 5 minutes then plug back in and turn it on,this will reset the brain and go back to normal.