Question about Computers & Internet

1 Answer

Linksys am 200

I installed abovementioned adsl modem. Get it to connect to the internet, but can not access the internet through IE, Opera, neither download my email with Outlook! Help!

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 59 Answers

If you have windows XP the click START/RUN/ then type in CMD
in the window then press enter this will bring up a black command window.Once in there there are 2 things you can do.1st and easiest is to type in ipconfig/release
this will release your current internet address settings,then type
ipconfig/renew this will give your computer a new ip address and you can try to get on the internet after that. 2nd solution is to do the same thing go to START/RUN then type in cmd and press enter,the black command screen will open then type in
netsh winsock reset.If you do not have WINXP please do not rate me but respond with the kind of operating system you have and I may be able to help.IF THIS HELP RATE ME AS FIXYA! GOOD LUCK.

Posted on Nov 17, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I am connected but I have no internet access. I

Sounds like it could be a Gateway or DNS issue, is there anywhere you can enter the gateway and DNS addresses in the Belkin Other thing to check is the ADSL modem and the Belkin are not on the same subnet ie. the ADSL modem should not be 192.168.2.X. This is because the Belkin is a router and won't route to addresses in the same subnet

Mar 05, 2010 | Belkin (F5D7231-4) Wireless Router

1 Answer


Basically if your Internet service is DSL or cable it's just a plug and play. Just plug the computer to the modem once the Internet access has been activated by your ISP and your computer should automatically get connection from the modem.

Aug 16, 2009 | Paradyne (6211-A2-200) Router

1 Answer

Need to add Linksys WRT54G-TM wireless router with Linksys SPA 2102 phone adapter

your SPA2102-R seems to have one ethernet connection and one internet connection.
your WRT54G-TM seems to have one internet connection and 4 ethernet connections.

What you are trying to achive is; plug a ethernet cable into the ethernet connection on your SPA2102-R then plug the other end into the internet port of the WRT54G-TM

hope this helps, I have assumed that you intend to use a DSL broadband supplier not ADSL.

if you are changing service from DSL to ADSL then your WRT54G-TM needs to be first in line configured and working. then plug the internet port from the SPA2102-R into any of the WRT54G-TM ethernet ports.

Nov 06, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Sharing internet with bt voyager 210 adsl router and linksys broad band router

hook you linksys uplink you cabel out from adsl router uplink other end goes to links wan

Aug 14, 2008 | Computers & Internet

3 Answers

How to connect linksys router with aztech adsl modem

To setup your router
first check..
Connect the Broadband modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If it is not, contact your Internet Service Provider. If it can go online,
to setup connection..
Step 1:
Connect the Broadband modem to the router’s WAN or Internet port.
Step 2:
Connect the computer to any available numbered port (1, 2, 3 or 4).
NOTE: In this example, we’ll connect the computer to port number 3.
Step 3:
Make sure the power adapter is plugged to an available power outlet.
Step 4:
check if you are able to go online wired..
if not your router has to be configured first,
to config your router i need some more information
your internet service providers (isp)name , and how many computers do u have totally..

Nov 16, 2007 | Computers & Internet

3 Answers

Setting up linksys adsl2 modem

The ADSL, Ethernet, and USB ports are located at the back of a Linksys modem. These ports are where the phone cable and computer will be connected. The ADSL Line should be connected to the ADSL port and the computer either be connected to Ethernet or the USB port., If u r using a ethernet cable no need to run the setup cd just connect the ethernet cable and contact ur isp..
do not worry about ur sagem modem, let it be inside.. just connect ethernet cables alone..

To setup a Linksys ADSL Modem with usb cable you need to perform two steps:
  1. Connecting the Devices Together
  2. Installing the USB Driver
Connecting the Devices Together
Step 1:
Connect the phone cable to the wall jack with ADSL service and then connect the other end to the ADSL port of the modem.
Step 2:
Make sure the power adapter is plugged to an available power outlet.
Step 3:
Connect the USB to the USB port on the back of the modem and then connect the other end top the USB port of the computer.
Step 4:
Power on the modem. After connecting the device together, install the USB driver. For instructions, follow the steps below.
Installing the USB Driver
Step 1:
Power on the computer.
Step 2:
When the Hardware Update Wizard window appears. Click Install the software automatically (Recommended).
NOTE: Windows XP has pre-installed drivers for the ADSL2MUE and will automatically install the USB driver for the modem.
Step 3:
Click Finish.

Nov 06, 2007 | Computers & Internet

1 Answer

How to set up network on belkin G+ wireless usb adapter

do you have a Wireless Router + Broadband modem?

This is like a base station to which your remote wireless node communicates (to get connected to your home network and internet.

something like this for an ADSL connection.

If you are on cable, you can either get a Router similar to the one above (but for cable)

or if your Cable modem has LAN ports you may just be able to use an "Access Point" to add Wireless capabilities.

Oct 14, 2007 | Belkin (F5D7050) 802.11a/g/b Wireless...

2 Answers

I am connected to the access point but the internet cannot be found

an Access point is to add Wireless to a LAN. (which is ok if you have a Router connected to your LAN).


if you have no Router,  and only have an ADSL/Cable modem connected to a PC then you should have got a Router +ADSL/Cable modem instead of an Access point.  you can get routers like this which also have wireless, so you get all the functionality in 1 box


Here is a Wireless router, with hub and ADSL +Cable Support


Oct 13, 2007 | Linksys WPC54G Wireless-G Notebook Adapter...

2 Answers

Configure WRT300N wireless Router to connect internet using PPPoE

Often the nets and subnets are NOT the same.. ie The Fixed connection often uses,, however sometimes the wifi is setup, or etc, have you checked this? Esentially tho ya router is an "Acess Point" and ya Lappy etc is ya "Client" the links below has a lot of tutorials to help have a look.

Aug 05, 2007 | Linksys WRT300N Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides