Question about Hayward Pool Products HAYWARD 1.5 HP 2 SPEED SUPER PUMP - INGROUND POOL PUMP -

2 Answers

Haywards Super Pump Tick tack sound

I have a Hayward super Pump, for about 3 years, the pump was working fine, this week when I turn on the pump stated working find but after one minute starts making a tick tack sound. I want to know what's wrong.Thank you,Henry

Posted by on

2 Answers

The bearings and brushes are going. It could run like that for up to 5 years...

Some people specialize in fixing these, not too many though. I would replace the motor instead of throwing good money after bad.

Posted on Sep 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

You may have been running it on the wrong voltage for 3 years especiallyif you feeding it 120 volts to a 220 setup. Assuming it is getting the right voltage and it clicks off and on you run winding is bad so the start winding cliicks on to bring it up to run speed opens the switch but the run winding isnt there so it repeats the process forever till it fails.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1.5 hp Hayward Power Flo pump. It was working fine, unplugged to clear filter basket. When plugging back in it only makes a humming noise and does not pump. Took plate off back and it appears to be clean...


the start switch is dirty, needs to be cleaned, or the start capacitor is week or bad . carfully clean the switch first, use the sandpaper off a match book to clean the points

Jun 06, 2011 | Hayward 3/4hp Super Pump Inground Pool...

1 Answer

The pool pump is not turning over, there is power but it sounds like the motor is seized


If you have current and a ground, power wise your fine. You need to check and make sure there is no clogs in the lines causing the pump to fail. If you have no clogs and the pump sounds like it is trying to work, it probablly is seized up and needs replaced.

Oct 02, 2009 | Hayward 3/4hp Super Pump Inground Pool...

1 Answer

When I turn on my pool pump (Hayward Super Pump), I see sparks and the circuit breaker gets tripped. What should I do?


replace the pump or have it rewound at a motor shop it will take about a week. it is bad and you cant fix it your self normally.

Jul 21, 2009 | Hayward 1 Hp Super Pump Inground Swimming...

1 Answer

Hayward 1hp super pump stops working


Your motor has a thermal protection switch in it the reacts to an overheating condition. Once the motor cools enough it will turn back on. You may be able to have the motor rebuilt for about half the cost of new if it is not damaged to severely. Take it to a local electric motor repair shop for service. If it is damaged beyond repair, you can shop around for a new one. If you would like a quote, contact us at www.arrowpools.net with your pump model number and we can quote it.

Jul 12, 2009 | Hayward Pool Products HAYWARD 1 HP 2 SPEED...

2 Answers

My new Hayward Super Pump is over Amping


Sounds like the wire gauge (thickness) is to small

Jun 04, 2009 | Hayward Pool Products Hayward Super Pump

1 Answer

Lossing Prime


It's pulling in air very slowly from somewhere:

priming pot lid,
valve body tops,
valve handles,
pipe unions, --
check gaskets/o-rings-- replace defective ones, lubricate
tighten everything possible

Apr 10, 2009 | Hayward 1HP Super Pump II Inground Pool...

Not finding what you are looking for?
Hayward Pool Products HAYWARD 1.5 HP 2 SPEED SUPER PUMP - INGROUND POOL PUMP - Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool Products Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

ray gallant

Level 3 Expert

42850 Answers

Tom Chichester

Level 3 Expert

34089 Answers

Are you a Hayward Pool Products Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...