Question about Razor E100 Electric Scooter

2 Answers

Wiring digrahm . Is one available? - Razor E100 Electric Scooter

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

Wiring digrahm - 71303b9.jpg

Try this

Posted on Nov 06, 2009

  • Alvaro Abadia
    Alvaro Abadia Apr 08, 2012

    Please, it is possible to paste a better image of this diagram. I can not read the notes, also the printed image is so blurry.
    I have a E100 scooter, and the motor did not run, the battery is fully charged (24V).
    When I connect the two wires( red/black) to the Reset boton, I just get 0.171 V. Also, when I connect the same wires directly to the motors wires, I did not get that the motor start/run (but the Voltage is reading 24Vbefore be connected).....
    How can I determine if the control module, the reset button or the 24V motor are damaged.


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 130 Answers


Posted on Jul 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mercedes 300e 1989. Pre ignition when I turn the key off and still wont start. any help

if starter turns and engine will not ignite remember it is fuel, electrical or mechanical check the fuel pump relay then fuel pumps the relays do fail after 20 years the pumps rarly fail.
Did you change the fuel filter?
if starter does not turrn start checking
electrical gremlins are challenging but if you are systematic and have a wiring digrahm you will find the problem

Jan 07, 2014 | Cars & Trucks

1 Answer

A/c unit wireing digrahm

how many wires does the fan motor have and what colors? also, i assume there is no diagram on the motor itself? are you using a dual capacitor or a separate one for the compressor and one for the fan?

Jun 06, 2013 | Heating & Cooling

1 Answer

Starter wire colors 2007

make and model ??

Dec 23, 2012 | Cars & Trucks

1 Answer

Where can i find digrahm for serpentine belt

What is the engine size and I can draw one up for ya.

Nov 03, 2010 | 1995 Jeep Grand Cherokee

1 Answer

1999 buick century. headlights won't come on automatically. Nor will they come on when pulling out the headlight knob. Bright lights will turn on if I hold (and continue to hold) the turning signal switch....

Sounds like you don't have power to the switch or the auto switch.When you pull on the turn switch you are just flahing the high beams.Almost all gm's will do that.Would try and check fuses or get a wiring digrahm and see were the power comes from to feed the switch.If you work on apliances its about the same.Well good luck

Jan 27, 2010 | 1999 Buick Century

1 Answer

I'm looking for a digrahm of a 2001 Ford Explorer Sport fuse box diagrahm that I can download free

Go to your local library and use ALLDATA online subscription. You can get a diagram from this site.

Nov 30, 2009 | 2001 Ford Explorer Sport

1 Answer

Furnace and Air conditioner run at the same time

Odds are u did just that or wrong thermostat,If u don't have a digrahm get one from Library.

Oct 02, 2009 | Dometic Rooftop RV Air Conditioner

1 Answer

Need wiring digrahm for 5hp buffalo tools air compressor

I have a 5.5 hp kobalt air compressor, I removed the cover where the capacitors are to replace the overload reset button, I want to make I wire them right, can you help me??? by the way, get me information how to wire the capacitors back. Thanks lui

Apr 01, 2009 | Air Tools & Compressors

Not finding what you are looking for?
Razor E100 Electric Scooter Logo

Related Topics:

981 people viewed this question

Ask a Question

Usually answered in minutes!

Top Razor Toys Experts

Clif Roberts

Level 2 Expert

89 Answers

Bryan Mcphee
Bryan Mcphee

Level 1 Expert

23 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Razor Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides