How do I inflate my blood pressure device it is a CVS model BM 35

YOU did NOT SPECIFY your MODEL NUMBER but tonight ~ Christmas Eve ~ YOU got LUCKY! I found this and it may help you... but
THIS INFORMATION MAY NOT BE FOR YOUR DEVICE!

"LCD shows "Er 4"
Pneumatic system leak
or cuff is too loose during inflation

And this:

LCD shows "Er 0"
Pressure system is instable before measurement
Be still and measure again

LCD shows "Er 1"
Systolic pressure detect fail

LCD shows Er2 Diastolic pressure detect fail

LCD shows "Er 3"
Pneumatic system is
blocked or cuff is too
tight during inflation
Place the cuff correctly
and try again

LCD shows "Er 4"
Pneumatic system leak
or cuff is too loose du-
ring inflation

LCD shows "Er 5"
Inflation
above
300mmHg
Measure again after 5
minutes. If the moni-
tor is still abnormal,
please contact the
local distributor / ma-
nufacturer.

LCD shows "Er 6"
Over 3 minutes while
pressure above 15
mmHg

LCD shows "Er7"
EEPROM accessing er-
ror

LCD twinkling
Device
parameter
check error

LCD shows "Er 9"
MCU self-verity error

LCD shows "Er A"
Span error

LCD shows "Er b"
EEPROM Backup-error


http://webcache.googleusercontent.com/search?q=cache:V0KPe0jswmgJ:www.hmm.info/uploads/tx_sbdownloader/smartLAB_profi_user_manual_ENGLISCH_R4.pdf+&cd=2&hl=en&ct=clnk&gl=us&client=firefox-b-1

previously answered on FIXYA...

Please click the following link... (telephone for mailed copy)
NEED THE MANUAL OR INSTRUCTIONS FOR THE CVS BLOOD PRESSURE

To call CVS at 1-866-464-6184...

ELSE
just search on the BP3MV1 portion of the
MODEL NUMBER.

Hope this helps

Carnac the Magnificent

You would need to contact the manufacturer of the monitor for that.

If it is an older device then rubber seals may have dried out. If not in warranty and you are capable then take it apart and use olive oil on the rubbers. If it does not even pump then get a replacement.

The E is an error code, do you have the arm band on correctly? Here is a link the manual:

http://www.beurer.com/web/we-dokumente/gebrauchsanweisungen/GA_USA/753.902_1012_BM35_CVS.pdf

Switch to the leg. You can take the pressure on the calf or the thigh. The thigh is easier. Place the cuff closer to the knee and if the sensor can be seen on the units cuff put that under the leg close to the knee joint. Inflate as normal. The reading may be higher than you expect by 10% So if it says 140/80 it would be 126/72

Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may have been moving your arm while the unit was obtaining the readings. You need to repeat the measurement while staying still.

The other possible cause of the error are that the cuff didn't inflate in a reasonable length of time. Check that the cuff is properly placed on your arm. Also make sure that the inflation hose is tightly connected to the cuff socket on the unit.

I hope this helps.

Cindy Wells

Do you mean you cannot get the cuff inflated?

To clear the memory, press the MEM button, then the display
shows no. 1. Press the "+" button to select the user memory you want to clear and confirm by pressing MEM again. Press and hold the "+" and "clock" keys simultaneously for 5 seconds (the display will show CLA). That user memory has been cleared.

Did not solve my problem. I'm not comfortable giving out my credit card number for a FREE 7 day trial. If it is a FREE 7 day trial why do you need my credit card number. This to me sounds like a scam with the potential to tap into my credit card account. Your business model may sound good to you but to me it does not sound like a legitimate service