Question about Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Monitor problem Displayed window is not rounded at top of screen.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers
Re: Monitor problem

Your monitor is starting to go bad. Time for a new one. This can be repaired, but not really worth it, unless you are a trained tech who knows how to refurbish monitors.

If you know how to solder and can do some board repair, then replace all of the capacitors in the power supply part of the board and maybe replace the Horz. Output Transistor (HOT).

Since it is a CRT, dump it and get a LCD.

Posted on Nov 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My LCD Dell Flat Screen Monitor has a blue

Open it up and look at the capacitors. The round "tin can" looking components. If the tops appear bulged, then replacing them may help. Check out the YouTube video... and web site...

Good Luck!

May 12, 2010 | Dell E197FP LCD Monitor

1 Answer

Windows XP on my Gateway PC will not accept Viewsonic Widescreen VA1912wSeries . My HP PC broke & I moved the montor to the Gateway. The HP had the same Windows XP system.

Reboot the computer into safemode. to do this tap F8 after the logo screen for gateway goes away. select Safe Mode.

Right click the desktop and click properties. in this window click settings. change the resolution to 1024x768.

click the advanced button. click monitor tab then set the screen refresh rate to 60 hertz.

if the monitor is compatible it will be able to be displayed. else try 1440x900 and 60Hertz for the settings

Feb 12, 2010 | ViewSonic VX2035WM LCD Monitor

1 Answer

Screen says out of range

I would say that the computer is trying to use a display resolution that the monitor is incapable of displaying. You may have to lower the resolution from the PC before you get a picture. Make sure you install the correct drivers for the monitor onto the new computer and use a different monitor to adjust the display resolution to a level that the monitor is capable of displaying.

Dec 15, 2009 | AOpen F2705 17" LCD Monitor

1 Answer

My Dell 17' monitor will come on for only about 3 seconds then the screen goes black. Worked fine this morning... is there anything I can do?

you have lost the large capacitor in the power supply of the monitor (a common problem) the capacitor is a round can; it has creases in the top; the can top is flat if good, round if bad. replace it

Oct 05, 2009 | Dell E173FP 17" LCD Monitor

1 Answer

Screen jumps back to prior screen

If you mean to say that the computer-generated displayed image on your screen changes, it's a function of the computer, not the monitor. If you mean to say that some monitor-generated displayed image is appearing (such as a setup/configuration menu or a splash screen), please tell us more so we can diagnose further.

Sep 12, 2009 | ViewSonic VP201b 20.1" LCD Monitor

1 Answer

I have LG 700S 17" Monitor

Try tapping f8 when you start your computer and when at the MS startup menu choose
  • Enable low resolution video (640x480)
  • and if windows starts update your video driver and that should fix the problem, when you restart more than once the options go back to default (not low res video,whatever video driver is installed)

    Mar 12, 2009 | LG Studioworks 700S 17" CRT Monitor

    1 Answer

    My AL1716 doesn not work in DOS


    The screen probably does work in DOS but the laptop doesn't bother sending it any signal in DOS, it's only when windows starts that windows takes control of the displays and shoots out a signal to the external monitor

    I don't know how you would get round this because you can't see your BIOS which you need to go in to and set the primary monitor to external.

    Feb 06, 2008 | Acer AL1716 17" LCD Monitor

    1 Answer

    My AOC 17" CRT monitor displays large veiw on DOS & some PC DOS games where the top portion is displayed at the bottom of the screen.

    sounds like you need to run a screen config wizard. If you have a true Nvidia driver you can do this. Otherwise, re-download the driver from the main website
    and it'll work for you

    Nov 01, 2007 | AOC CT700G 17" CRT Monitor

    3 Answers

    HP Pavilion F1523

    Open the screen and on the backside there are two pcb's.
    Left is the power conversion unit and right is the hardware for the display. I had the same problem. So on the left one you will find a lot of capacitors (ELCO). Look for those ones with a rounded top. note their capacity and current (most fragile are the 16V470uF and 16V1000uF). Replace the ELCO's with rounded tops. NOTE THE POSITIVE AND NEGATIVE SIDES!!! DONT SWAP THESE or you will end up with another one with a rounded top. Solder it all together and close the screen. Your problemo is solvento!

    Oct 10, 2007 | HP Pavilion F1523 15" LCD Monitor

    Not finding what you are looking for?
    Samsung SyncMaster 753S 17" CRT Monitor Logo

    Related Topics:

    56 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Computer Monitors Experts

    Rugeshan Lanka
    Rugeshan Lanka

    Level 1 Expert

    15 Answers

    Pieter Vleeshouwers

    Level 3 Expert

    1333 Answers

    Lawrence Oravetz

    Level 3 Expert

    7235 Answers

    Are you a Samsung Computer Monitor Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides