Question about Toro Lawn Mower With Toro Power Tools

2 Answers

What length is a deck belt on a toro lx460 - Toro Lawn Mower With Toro Power Tools

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

1/2" x 90" ; Toro P/N 112-5834

Try:
http://www.tractorsupply.com/outdoor-power-equipment/mowers-attachments-accessories-parts/mower-parts/mower-belts/huskee-v-belt-1-2-x-90-in-4461290
for $19.49 if you have a Tractor Supply Company nearby.

Or:
http://www.texasmowerparts.com/catalog/products.asp?ds=DETAILED&category_id=47&group_id=184&section_id=585
# Replaces Toro 112-5834 # 1/2" X 90"
for $14.17 + $5.95 shipping

Danotex

Posted on Oct 03, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

IS THIS THE BELT FROM THE ENGINE TO MOWER

Posted on Jul 27, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1990 toro wheel horse classic 312 8 lawn tractor, it has a 42 inch side discharge deck, What's the deck drive belt size of this mower, model 31-12K801, I have searched for hours


If the belt is in one piece, put a chalk mark on the back of the belt and measure the length by running a tape measure from one side of the mark all the way around the belt until the mark appears. Take that measurement, subtract an inch for stretch and that number is the number of the belt you need. If it's broken in two, not three, then simply measure the length of the belt.

May 28, 2016 | Garden

1 Answer

What is the size of drive belt for toro riding mover lx460


Refer your inquiry directly to Toro or a local Toro dealer.

Jul 27, 2014 | Toro Garden

1 Answer

Need size of the deck belt toro 212.5 wheel hourse


the size of the belt would change with the size of the deck

Jul 02, 2012 | Toro Garden

1 Answer

How to tighten belt on aToro LX460 V twin


it may have stretched and needs a new belt there is a spring tensioner that can only go so far

Apr 20, 2012 | Toro LX466 22HP Lawn Tractor 13RT61RH244

1 Answer

Toro lx 500 deck belt pops off


check for play in the bearings blade bearings and the idler pulleys

Apr 14, 2012 | Toro Garden

1 Answer

How do you hold the blades on a toro LX460 while breaking the nut loose to change them


Use a piece of 2x4 and a clamp. Clamp the wood to the inside of the deck using the clamp. When the blade comes around and bumps against the wood it should act as a stop. Or you could rig something with a Vise-Grip plier. Lock onto the blade with the Vise-Grip, run a piece of rope from the pliers to a point on the mower where it will stop the blade from turning.

May 23, 2010 | Toro Lawn Mower With Toro Power Tools

2 Answers

I need to replace a belt on a craftsman with a 42" deck.What size belt should I get.What length.


Craftsman is made by Murray Corp. who also makes Murry, YardMan, Lowes, Penncraft, and on and on. Go to your local Wal-Mart, Lawn and Garden Dept. and look for the belt that fits the Murray, YardMan, Lowes, Toro, 42" Deck 14-18 HP. Or take your old belt with you, and stretch them both end to end holding the end loops with each hand. Or you could go to Sears and just tell the parts department what your mower is and they can get you a Craftsman belt. It will be the same one you get at Lowe's, Wal-Mart, ect, probably just cost a little more. Sears doesn't make mowers, they just have their colors and names put on by the manufactorer. And Murray of Ohio is the maker of these.

Sep 26, 2009 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

Install belt on toro mower model 70041


For removing/replacing the deck belt, the general method is:
  1. turn off engine, remove key and set parking brake
  2. disengage blade by putting blade engage lever into off (disengaged) position
  3. lower the cutting deck to the lowest position (closest to the ground)
  4. relieve the belt tension (depending on the model, use a 3/8 inch ratchet set to tighten in the square hole of the idler bracket)
  5. remove and replace the belt
NOTE: it's not necessary to completely remove the cutting deck.

Useful diagrams for removing the cutting deck, http://216.213.143.2/ProAuthor/ManProc.cfm?ManualID=425&ProcID=14794

For deck belt diagrams, http://216.213.143.2/ProAuthor/ManProc.cfm?ManualID=425&ProcID=14796

If the transmission drive belt needs to be replaced, several components must be removed and special tools (i.e. air/impact wrench) used in order to change the tractor's transmission drive belt. See an Authorized Toro Service Dealer to have your drive belt replaced.

Sep 09, 2009 | Toro Lawn Mower With Toro Power Tools

Not finding what you are looking for?
Toro Lawn Mower With Toro Power Tools Logo

Related Topics:

2,243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toro Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

338 Answers

lnbn1975

Level 2 Expert

203 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Toro Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...